Advertisement
7.
MAINTENANCE
.
IMPORTANT: Only fully qualified personnel should attempt maintenance or repair.
7.1.
When the jack is not in use, the saddle must be in the lowest position to minimise ram and piston corrosion.
7.2.
Keep the jack clean and wipe off any oil or grease. Lubricate all moving parts with acid free oil.
7.3.
The oil cylinder is a sealed unit and must not be accessed. For service contact your authorised service agent.
WARNING! Only a good quality Jack oil, such as SEALEY HYDRAULIC JACK OIL (Part No: HJO500MLS or HJO5LS) must be used, DO
‰
NOT use brake fluid.
7.4.
Before each use, follow the pre-check list to ensure components are in good working order. If any suspect item is found remove jack from
service and take necessary action to remedy the problem.
DO NOT use the jack if you believe it has been subjected to an abnormal load or shock. If in doubt contact your authorised service agent.
7.5.
Periodically check the pump piston and piston rod for signs of corrosion. Clean exposed areas with a clean oiled cloth.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE JACK.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT return jacks to us. Please telephone 01284 757500 to obtain address and 'phone number of your local agent.
If Jack is under guarantee please contact your stockist.
De-commissioning the Jack: Should the jack become completely unserviceable and require disposal, draw off the oil into an approved
container and dispose of the jack and the oil according to local regulations.
8.
TROUBLESHOOTING
IMPORTANT: Although the following may identify a problem, we recommend the problem be resolved by an authorised service agent.
PROBLEM
Jack will not lift
Jack will only lift halfway
Raised load will not hold
Poor lifting
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
.
CAUSE
No hydraulic oil, or defective suction valve or delivery valve
Release valve is open
Hydraulic oil low, or excess of hydraulic oil
Defective valves, or defective piston packing
Defective plunger packing
sales@sealey.co.uk
Original Language Version
SOLUTION
Contact authorised service agent.
Close release valve.
Contact authorised service agent.
Contact authorised service agent
Contact authorised service agent.
www.sealey.co.uk
1000ETJ
Issue 2 (ALL)
REGISTER YOUR
PURCHASE HERE
21/09/23
Advertisement
