Hitachi ED-D10N User Manual page 26

Operating
Using the menu function (continued)
3.
To close the MENU, press the MENU button again or select the EXIT and
press the ◄ cursor (or the ENTER) button. Even if you do not do anything,
the dialog will automatically disappear after about 30 seconds.
● If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)
cannot be reset.
● In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor (or the ESC) button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
RETURN
CANCEL or NO
OK or YES
26
Selecting this word finishes the OSD menu. It's the same as
pressing the MENU button on the remote control.
Selecting this word returns the menu to the previous menu.
Selecting this word cancels the operation in the present
menu and returns to the previous menu.
Selecting this word executes the prepared function or shifts
the menu to the next menu.
Meaning