Table of Contents

Advertisement

Quick Links

Dishwasher
SPV2HKX42G
[en]
Information for Use

Advertisement

Table of Contents
loading

Summary of Contents for Bosch SPV2HKX42G

  • Page 1 Dishwasher SPV2HKX42G [en] Information for Use...
  • Page 2: Table Of Contents

    Further information and explanations are available online: Table of contents 1 Safety ...........  4 8.2 Knife shelf........  20 1.1 General information.... 4 8.3 Etagere ........ 20 1.2 Intended use...... 4 8.4 Bottom basket ...... 21 1.3 Restriction on user group.. 4 8.5 Folding prongs ......
  • Page 3 20 Customer Service....  49 13.2 Arrange tableware .... 30 20.1 Product number (E-Nr.), 13.3 Removing tableware.... 31 production number (FD) 14 Basic operation .......  31 and consecutive numbering (Z-Nr.) ........ 50 14.1 Switching on the appliance ...  31 20.2 AQUA-STOP guarantee .. 50 14.2 Setting a programme ....
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6: Safe Use

    en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶ Check that there is a distance of at least 5 cm between the ap- pliance and installation lines.
  • Page 7 Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
  • Page 8: Damaged Appliance

    en Safety 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
  • Page 10: Preventing Material Damage

    en Preventing material damage Modified or damaged water hoses Preventing material damage 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing material damage 2.1 Safe installation Only use the water hoses supplied ▶...
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en So as not to scratch the finish on ▶ Installation and connection 4 Installation and con- the appliance, do not use sponges with a rough surface or abrasive nection cleaning agents. To prevent corrosion, do not use To ensure proper operation, connect Installation and connection ▶...
  • Page 12: Drainage Connection

    en Installation and connection installing it under a continuous work- 4.4 Drinking water connec- top that is securely connected to ad- tion jacent cabinets. Follow the safety instructions. Connect your appliance to a drinking → Page 4 water connection. Follow the instructions for electrical Installing the drinking water connection.
  • Page 13: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 50.
  • Page 14 en Familiarising yourself with your appliance Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 26 Bottom basket Bottom basket → Page 21 Filter system Filter system → Page 40 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 22 Tablet collecting tray During the wash cycle tablets automatic- ally fall out of the detergent dispenser into...
  • Page 15: Controls

    Familiarising yourself with your appliance en 5.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 4 5 6 7 ON/OFF button and reset Switching on the appliance button...
  • Page 16 en Familiarising yourself with your appliance Programme buttons and addi- Programmes tional functions → "Programmes", Page 17 Additional functions → "Additional functions", Page 19 Door handle Open the appliance door. WLAN display Home Connect → Page 36 Rinse aid refill indicator Rinse aid system → "Adding rinse aid", Page 25 Special salt refill indicator Water softening system → "Adding special salt", Page 23...
  • Page 17 Programmes en Programmes 6 Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 18: Information For Test Institutes

    en Programmes Programme Programme se- quence Favourite Note: The relatively long running time ¡ To reset the programme to the in the Eco 50 ° programme is due to Pre-rinse programme stored at the longer soaking and drying times. This factory, use the Home Connect results in optimal consumption val- or reset your appliance to ues.
  • Page 19: Additional Functions

    Additional functions en Additional functions 7 Additional functions You can find an overview of the additional functions that can be selected here. Additional functions Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
  • Page 20: Knife Shelf

    en Features You can adjust the height of the top 8.2 Knife shelf basket to make room for larger items Use the shelf for knives and long of tableware. items of cutlery. Adjusting top basket with pairs of rollers To wash large items of tableware in the baskets, adjust the shelf position of the top basket.
  • Page 21: Bottom Basket

    Features en 8.4 Bottom basket 8.5 Folding prongs Arrange pans and plates in the bot- Use the folding prongs to position tom basket. tableware securely, e.g. plates. Cutlery basket You can fold the prongs down to po- sition pans, bowls and glasses Large plates up to a diameter of better.
  • Page 22: Cutlery Basket

    en Before using for the first time Add special salt. → Page 23 8.6 Cutlery basket Add rinse aid. → Page 25 Arrange cutlery in the cutlery basket, Switch on the appliance. always without sorting it and with the → Page 31 sharp points downwards. Setting the water softening system. → Page 23 Set the amount of rinse aid to be dispensed.
  • Page 23: Setting The Water Softening System

    Water softening system en Water Hardness mmol/l Setting LED A LED B LED C hardness range value °E 0 - 8 Soft 0 - 1.1 9 - 20 Medium 1.2 - 2.9 21 - 26 Hard 3.0 - 3.7 27 - 62 Hard 3.8 - 8.9 Press...
  • Page 24: Switching Off The Water Softening System

    en Water softening system Special salt for dishwashers can 10.4 Switching off the water damage the tub due to corrosion. softening system To make sure that any special salt ▶ that escapes is washed out of the If you find the special salt refill indic- tub, add the special salt to the dis- ator irritating, e.g.
  • Page 25: Regeneration Of The Water Softening System

    Rinse aid system en 10.5 Regeneration of the wa- Rinse aid system 11 Rinse aid system ter softening system Rinse aid system In order to obtain fault-free function of 11.1 Rinse aid the water softening system, the appli- ance performs regeneration of the For optimum drying results, use rinse water softening system at regular in- aid.
  • Page 26: Setting The Amount Of Rinse Aid

    en Detergent Close the lid of the dispenser for 11.3 Switching the rinse aid rinse aid. system off a The lid clicks into position. If you find the rinse aid refill indicator irritating, e.g. when using combined 11.2 Setting the amount of detergents with a rinse aid compon- rinse aid ent, you can switch the rinse aid sys- tem off.
  • Page 27: Unsuitable Detergents

    Detergent en Note: Follow the manufacturer's in- For better washing and drying results structions for each detergent. and to avoid damage to the appli- ance, please additionally use Special Tip: Suitable detergents are available salt → Page 23 and Rinse aid online via our website or from Cus- → Page 25.
  • Page 28: Information On Detergents

    en Detergent Add the detergent to the dry deter- 12.3 Information on deter- gent dispenser. gents Follow the instructions on detergents 50 ml in everyday use. 25 ml ¡ Detergents marked as "organic" or 15 ml "ecological" (environmentally friendly) generally contain lower levels of active agents or com- pletely dispense with certain sub- stances.
  • Page 29: Tableware

    Tableware en Close the lid of the detergent dis- 13.1 Damage to glass and penser. tableware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommenda- tion The following...
  • Page 30: Arrange Tableware

    en Tableware allowing steam to escape and water Cause Recommenda- to leak out around the door. This tion could damage your kitchen units. Highly caustic al- If you are using kaline or highly highly caustic al- acidic cleaning kaline or highly solutions, in par- acidic cleaning ticular commer-...
  • Page 31: Removing Tableware

    Basic operation en To save resources, do not pre- 13.3 Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin.
  • Page 32: Setting A Programme

    en Basic operation a While the programme is running, a 14.2 Setting a programme spot of light is projected onto the To adjust the washing programme to floor below the appliance door. the soiling level of the tableware, se- This light will not be visible if the lect a suitable programme.
  • Page 33: Terminate Programme

    Basic operation en Press to resume the pro- gramme. Close the appliance door. 14.7 Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Open the appliance door. Press for approx.
  • Page 34: Basic Settings

    en Basic settings Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 15.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Water hardness Scale with 4 levels Set the water hardness.
  • Page 35 Basic settings en Basic setting Selection Description Remote Start Scale with 3 levels Activate or deactivate the function. → "Activating Remote Start ", Page 36 This basic setting is not available until you have connected the appliance with the Home Connect app. → "Home Connect ", Page 36 Factory setting Reset...
  • Page 36 en Home Connect Press repeatedly until the Set Wi-Fi LEDs show the right value. Press ⁠ . To open the appliance settings, press for 3 seconds. flashes. Press repeatedly until flash. Press repeatedly until the LEDs show the right value. If LED A lights up, the function is permanently deactivated.
  • Page 37: Setting Up The Home Connect App

    Home Connect en Home Connect services in your coun- Open the Home Connect app and try. You can find information about scan the following QR code. this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi and to the Home Connect app.
  • Page 38: Data Protection

    en Cleaning and servicing 16.4 Data protection Cleaning and servicing 17 Cleaning and servi- Please see the information on data cing protection. The first time your appliance is To keep your appliance working effi- Cleaning and servicing registered on a home network ciently for a long time, it is important connected to the Internet, your to clean and maintain it carefully.
  • Page 39: Machine Care

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which...
  • Page 40: Filter System

    en Cleaning and servicing ¡ Follow the safety instructions given Cleaning filters on the packagings of the machine Soiling in the dishwashing water may care products and machine clean- block the filters. ers. After each wash check the filters Remove any coarse soiling in the for residue.
  • Page 41: Cleaning Spray Arms

    Cleaning and servicing en Press the locking catches 17.6 Cleaning spray arms gether and lift the coarse filter out Limescale and soiling in the dish- ⁠ . washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arms and pull down to remove Clean the filter elements under run-...
  • Page 42: Troubleshooting

    This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website www.bosch-home.com. WARNING Risk of electric shock! Incorrect repairs are dangerous.
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Display for water sup- Re-insert the filter in the supply hose. ply lights up Screw the water connection back on. Check the water connection for leaks. Restore the power supply. Switch the appliance on. Filters are soiled or blocked. Clean the filters.
  • Page 44 en Troubleshooting Fault Cause and troubleshooting Display "Check water A technical fault is present. supply" flashes Press Unplug the appliance or switch off the fuse. Wait at least 2 minutes. Insert the mains plug of the appliance in a socket or switch on the fuse. Switch the appliance on.
  • Page 45 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Tableware is placed too close together or basket is tableware. overfilled. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the table- ware. Avoid points of contact. Spray arm rotation is blocked.
  • Page 46 en Troubleshooting Fault Cause and troubleshooting Removable streaks Amount of rinse aid to be dispensed is set too high. are present on Set the rinse aid system to a lower setting. ▶ glasses, glassware → "Setting the amount of rinse aid", Page 26 with a metallic appear- No rinse aid has been added.
  • Page 47 Troubleshooting en Fault Cause and troubleshooting Special salt refill indic- Do not use special salt tablets. ▶ ator lights up.
  • Page 48: Clean Wastewater Pump

    en Transportation, storage and disposal Insert the pump cover and press 18.1 Clean wastewater pump down ⁠ . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
  • Page 49: Protect Appliance From Frost

    Customer Service en 19.2 Protect appliance from 19.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 50: Product Number (E-Nr.), Production Number (Fd) And Consecutive Numbering (Z-Nr.)

    en Customer Service Customer Service for a period of at 20.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area.
  • Page 51: Technical Specifications

    Technical specifications en Technical specifications 21 Technical specifications Technical specifications Weight Max.: 45 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Inlet rate Min. 10 l/min Water temperature Cold water.
  • Page 52: Declaration Of Conformity

    BSH Hausgeräte GmbH hereby de- Declaration of Conformity A detailed Declaration of Conformity clares that the appliance with Home can be found online at www.bosch- Connect functionality conforms to the home.co.uk among the additional essential requirements and other rel- documents on the product page for evant provisions of Directive your appliance.
  • Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents