Advertisement
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly
recordings
will be performed
as programmed.
Repeat steps I and 2 on page 22,
Press AV to select the
desired program.
SELECT/SET
•
:CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
To Replace
program...
1) Press • to display.
2) Press _I,V to select and
press • or •to
set new
program contents.
3) Press PROG.
To Clear program...
PressADD/DLT.
Press PROG twice to exit this mode.
• 2 minutes before Timer recording is performed, "PLEASE
PREPARE
FOR TIMER REC _ appears
and/or the PROG
TIMER Indicator flashes.
Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recording
comes up during a
normal recording or One Touch Recording
(page t2), the Timer
Recording
will not be performed.
• If there is a power interruption
of more than one minute, the
recording
may not be performed or continued.
• If "INCOMPLETE"
appears after all items have been set, check
all entries and make necessary corrections.
Advertisement
