Installing the Access Panel
1.
Slide the access panel into its slot.
2.
Tighten the screw to secure the access panel to the computer.
3.
Install:
a) battery
b) SD card
After Working Inside Your Computer .
4.
Follow the procedures in
Removing the Memory Module
Before Working Inside Your Computer .
1.
Follow the procedures in
2.
Remove:
a) battery
b) SD card
c) access panel
3.
Pry the securing clips away from the memory module until it pops up. Remove the memory module from its socket
on the system board.
Installing the Memory Module
1.
Insert the memory module into the memory socket and press until it clicks into place.
2.
Install:
a) access panel
b) SD card
c) battery
After Working Inside Your Computer .
3.
Follow the procedures in
Removing the Hard Drive
Before Working Inside Your Computer .
1.
Follow the procedures in
2.
Remove:
a) battery
b) SD card
c) access panel
14