Table of Contents
Advertisement
Page 12
Scan this QR code to watch how to replace the brush. You
can view all of our Mopit movies on the "Mopit Channel" at
www.youtube/spectrummopit.com
MAINTENANCE / SERVICE
Brush Replacement
The Mopit Mid scrub brush is very durable and should last at least one
year. As the brush wears it can be lowered by following the instruc-
tions on page 10. For replacement follow the steps below.
1.
Use the on-board 5/32 Allen tool to
remove the two idle plate screws (12A).
2.
Pull off the bearing plate.
3.
Pull the old brush out of the hood (12B).
4.
Installation is the above steps in reverse .
12A
12B
Advertisement
Table of Contents
