Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general. Workshop practice regulations are adhered to when using this rack.
Locate rack in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use rack on level and solid ground, preferably concrete.
Keep the rack clean and tidy in accordance with good workshop practice.
9
DO NOT use the rack for any purpose other than that for which it is designed.
8
Keep children and unauthorised persons away from the work area
9
2. INTRODUCTION
Powder coated steel racking with composite storage bins positioned evenly on both sides. Mounted on heavy-duty castors (two
lockable) for mobility.
3. SPECIFICATION
Model No: ............................................................ TPS94
Overall Size: .................................940 x 500 x 1245mm
Bin Dimensions:
Medium Bin (x64): ............................ 110 x 160 x 75mm
Large Bin (x30): ............................. 150 x 235 x 125mm
© Jack Sealey Limited
94 BIN MOBILE STORAGE SYSTEM
TPS94
MODEL NO:
Original Language Version
TPS94 Issue:4 03/07/23