LIFECO GLF-GDW Installation & Operation Manual

INSTALLATION & OPERATION GUIDE
LPG GAS DETECTOR
MODEL: GLF-GDW
LOCATING THE DETECTOR
LPG
>1.5M
100mm
TEST
OPERATION
GLF-GDW
ALARM
2 1
FLAMMABLE GAS DETECTOR
FAULT
ALARM
2
RESET POWER
ALARM
2
Unit 8, Calibre Industrial Park, Laches Close, Four Ashes, Wolverhampton, WV10 7DZ, United Kingdom | T +44 1902 798 706 F +44 1902 798 679 | E sales@lifeco-uk.com | www.lifeco-uk.com
100mm
With no alarms
press for 5s to test
Alarms are active until reset
by pressing reset button.
You cannot reset the unit if
gas is still present
1
10% LEL
1 ALARM
ST
1
20% LEL
2 ALARM
ND
CAUTION
Alarm 1
FOLLOW
~10% LEL
EMERGENCY
Alarm 2
ACTIONS
~20% LEL
Normal
Fault
The GLF-GDW is pre-calibrated
for its indicated target gas, usually
LPG . The GLF-GDW will respond
to any flammable gas to a
greater or lesser degree. The
following list indicates typical
materials that may be commonly
present which the unit may
respond to in operation:
Aerosol Propellants (Butane)
Paint Solvents (VOC's)
Hot Cooking Oils
Nail Varnish
Solvent Based Adhesives (VOC's)
Some commonly occurring
substances may cause long term
detector damage, typically:
Silicones (furniture polishes)
Hair sprays (Silicones, VOC's etc)
Chlorinated Cleaning Agents
Alarm Level 1 Alarm Level 2 Sounder Power
relay relay
CALL FOR SERVICE
Information
+55 C
-10 C
Fault Alarm
LED LED LED
V6.0