Sealey SX208.V2 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! DO NOT use the tool if damaged or thought to be faulty.
‰
WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
‰
using tools.
WARNING! If jacking up a vehicle refer to manufactures instructions for vehicle and jack.
‰
DO NOT use the tool for a task it is not designed to perform.
8
DO NOT use worn, or damaged sockets.
8
DO NOT use the tool unless you have been instructed in its use by a qualified person.
8
DO NOT operate the tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Maintain the tool in good condition.
9
Follow all workshop safety rules, regulations and conditions.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the working area.
9
2. INTRODUCTION
Set of 10 locking keys for the removal of security splined locking wheel nuts
on BMW and Mini. For distribution to bona fide vehicle dealers and repair
centres only.
3. CONTENTS
Component
SX208.V2-30.13PT
SX208.V2-31.15PT
SX208.V2-32.16PT
SX208.V2-33.17PT
SX208.V2-34.18PT
SX208.V2-35.19PT
SX208.V2-36.20PT
SX208.V2-37.21PT
SX208.V2-38.22PT
SX208.V2-40.23PT
4. OPERATION
4.1. Choose correct locking wheel nut key for vehicle.
4.2. Place the key over the wheel nut/bolt and rotate until the key slots into the wheel bolt/nut.
4.3. Attach either a 17mm socket plus drive to the key and turn anti-clockwise to remove wheel bolt/nut.
4.4. To replace bolt/nut reverse removal operation. Use torque wrench to tighten.
5. MAINTENANCE
5.1. Keep keys clean and store in case provided.
© Jack Sealey Limited
LOCKING WHEEL NUT KEY SET
10PC - BMW & MINI
MODEL NO:
Description
Locking Wheel Nut Key, BMW/Mini #30/13PT
Locking Wheel Nut Key, BMW/Mini #31/15PT
Locking Wheel Nut Key, BMW/Mini #32/16PT
Locking Wheel Nut Key, BMW/Mini #33/17PT
Locking Wheel Nut Key, BMW/Mini #34/18PT
Locking Wheel Nut Key, BMW/Mini #35/19PT
Locking Wheel Nut Key, BMW/Mini #36/20PT
Locking Wheel Nut Key, BMW/Mini #37/21PT
Locking Wheel Nut Key, BMW/Mini #38/22PT
Locking Wheel Nut Key, BMW/Mini #40/23PT
Original Language Version
SX208.V2
SX208.V2 Issue 1 15/06/23