Table of Contents
Advertisement
To copy module configurations from setup.raw
Set up the module configuration.
1
You can do this from the HP 16500B's X Window interface or front panel.
Access the HP 16500B's file system.
2
Refer to the "Accessing the HP 16500B File System" chapter.
Copy the setup.raw file from the appropriate \slot_{x}
3
directory.
Raw configuration files are binary format files that can be transferred to your
computer and then reloaded into the HP 16500B system later.
The setup.raw file is overwritten whenever you change the configuration of
the measurement module.
You can copy HP 16500B system and Intermodule Bus configurations by
copying the \setup.raw file to your computer.
Configuring HP 16500B Modules
To copy module configurations from setup.raw
4-3
Advertisement
Table of Contents
