Table of Contents
Advertisement
•
The configuration of the modular transmitter when installed into the host product must be within
the authorization of the modular transmitter at all times and can't be changed to include
unauthorized modes of operation through accessible interfaces of the host product. The
output power limits
product will not have the capacity to operate in the operating channels/frequencies referred to in
the section(s) below, namely one or several of the following channels: 12 (2467 MHz), 13 (2472
MHz), 120 (5600 MHz), 124 (5620 MHz), and 128 (5640 MHz). The channels 12 (2467 MHz), 13
(2472 MHz), 120 (5600 MHz), 124 (5620 MHz), and 128 (5640 MHz) are allowed to be used only
for modules that are certified for the usage ("modular transmitter"). Customers must verify that
the module in use is certified as supporting DFS client/master functionality.
•
The host product uses only authorized firmware images provided by u-blox and/or by the
manufacturer of the RF chipset used inside the modular transmitter.
•
The configuration of the modular transmitter must always follow the requirements specified in
Operating frequencies
accessible interfaces of the host product.
•
When installed into the host product, the modular transmitter must have a regional setting that
is compliant with authorized US modes. The host product must also be protected to prevent
unauthorized modes of operation of the modular transmitter, including the country code and other
modifications, by third parties.
•
The host product into which the modular transmitter is installed does not provide any interface
for the installer to enter configuration parameters into the end product that exceeds those
authorized.
•
The host product into which the modular transmitter is installed does not provide any interface
that allows third parties to upload any unauthorized firmware images into the modular
transmitter. The host product also prevents third parties from making unauthorized changes to
all or parts of the modular transmitter device driver software and configuration.
☞
OET KDB 594280 D01
product specific host meets the Configuration Control requirements.
☞
OET KDB 594280 D02
product specific host meets the Software Security Requirements for U-NII Devices.
6.3.5
Operating frequencies
JODY-W5 802.11b/g/n/ax operation outside the 2412–2462 MHz band is prohibited in the US and
Canada and 802.11a/n/ac/ax operation in the 5600–5650 MHz band is prohibited in Canada.
Configuration of the module to operate on channels 12–13 and 120–128 must be prevented
accordingly. The channels allowed while operating under the definition of a master or client device
are described in
Table
12
47 CFR §15.202
UBX-23001477 - R01
C1-Public
must be followed. In particular, the modular transmitter installed in the host
and can't be changed to include unauthorized modes of operation through
[15]
lists the topics that must be addressed to ensure that the end-
[16]
lists the topics that must be addressed to ensure that the end-
27.
Regulatory compliance
JODY-W5 series - System integration manual
Wi-Fi Tx
12
Page 45 of 52
Advertisement
Table of Contents
