Advertisement
Bass Joint
Insert
halfway
Rotate the bass joint so that the
2.
stopper on the bass joint comes into
contact with the tenor joint.
Stopper
Continue to insert the bass joint, all
3.
the way into the socket.
Fully insert
Normal type
As shown in the illustration below, gently
hold the bell key pad down to raise the
connection at the opposite end, and
insert the bell section into the bass joint.
Double Joint
Gentleman type
Insert the bell into the bass joint while
turning it so that the key connections do
not contact each other.
Align the mark "V" on the bell with the
mark "l" on the bass joint for the correct
position.
Assembly
Attaching the Bell
* Take care not to apply too much pressure
on the bell key pad.
7
Advertisement
