Advertisement
Quick Links
Instructions for Professional Use
QuickReach
Spray Pole
Model Nos. 28670, 28680, 28690
Important Safety Information
The QuickReach
family of spray poles is designed for professional use. You should ensure your spray
®
gun fits securely and operates correctly in the gun mount before using the equipment.
WARNING
High-pressure spray can cause serious injury. Observe all warnings and instructions for safe use
•
of this product.
Seek emergency medical aid immediately if any spray fluid appears to penetrate your skin.
•
To prevent injury, lock your spray gun trigger when you are not using the spray gun.
•
Before installing or removing your spray gun from the gun mount, power down your fluid delivery
•
pump and release pressure from the fluid hose following your pump and spray gun manufacturers'
instructions.
Your QuickReach
spray pole is an accessory item used with your existing spray equipment.
®
•
Observe the safety and operating procedures as stated by the manufacturers of your existing
equipment.
Do not use near electrical power lines.
•
Do not use when standing on a ladder.
•
Inspect your QuickReach
•
repair or replace worn or damaged parts.
Do not alter or modify your QuickReach
•
Telescoping
®
spray pole and spray equipment prior to each use and immediately
®
spray pole or spray gun mount in any way.
®
Document No. 111144
Advertisement
Related Manuals for HYDE QuickReach 28670
Summary of Contents for HYDE QuickReach 28670
- Page 1 Instructions for Professional Use QuickReach Telescoping ® Spray Pole Model Nos. 28670, 28680, 28690 Important Safety Information The QuickReach family of spray poles is designed for professional use. You should ensure your spray ® gun fits securely and operates correctly in the gun mount before using the equipment. WARNING High-pressure spray can cause serious injury.
- Page 2 Components and Terminology Setting Up for a Two- or Four-Finger Spray Gun 1. Push in spring loaded button and rotate the head assembly to switch between a two- or four-finger spray gun setup (Figure 1). 2. Release button to hold the head in place. 3.
- Page 3 Installing the Spray Gun Using the illustration as a guide (Figure 3), follow these steps to Figure 3 install your spray gun in the gun mount: Install the Spray Gun Two-finger gun 1. Prepare your spray gun and fluid delivery system for use. installation 2.
-
Page 4: Maintenance
3. Release the locking lever. pole and release the locking lever. Test to be sure it is seated properly. NOTE: You would only remove the mount if you were replacing it or if you are switching to another HYDE accessory. ® Maintenance After each use, wipe the QuickReach spray pole and gun mount with a cloth dampened with water or mineral spirits. -
Page 5: Troubleshooting
Troubleshooting Probable Cause Corrective Action Problem or Symptom a. Release button not seated. Make sure release button is seated. Head assembly will not stay in place. b. Fluid hose is not secured by hose clips. Secure uid hose to hose clips. a. -
Page 6: Warranty
Hyde Tools, Inc. for veri cation of this claim. If the claimed defect is veri ed, Hyde Tools, Inc. will repair or replace any defective parts free of charge. The equip - ment will be returned to the original purchaser transportation prepaid.
Need help?
Do you have a question about the QuickReach 28670 and is the answer not in the manual?
Questions and answers