Beko BHCA62442BWH User Manual page 15

Turning on the intensive ventilation mode
(Booster) (for models B and C)
1. Press key once to start the hood in
the intensive ventilation mode.
ð The intensive ventilation mode starts
up and runs for a maximum of 10
minutes. During this time, the
lights up. After 10 minutes, the product
continues to operate in Speed 3 and
the Speed 3 key lights up.
In intensive ventilation mode, when
any speed key is touched, it returns
to that speed level and continues
to operate.
Operating the lamp
1. Touch the key to operate the lamp.
ð Hood lamp lights. (For Models B and
C) If you touch the
within the first 1 minute, the lamp will
continue to light at the low illumination
level. If you touch it again 1 minute
after turning the lamp on, it turns off.
The illumination lamps operate for
a maximum of 12 hours.
Turning off the lamp
1. One minute after turning the hood lamp
on, you can turn it off by touching the
key again.
(For Models B and C) If you touch
the key again within the first 1
minute after the lamp is switched
on, the lamp switches to the low il-
lumination level.
Setting the lamp illumination colour (for
models B and C)
You can use the colour of your hood's illu-
mination lamps in 3 different shades.
1. With the hood lamp turned on, touch
key for more than 2 seconds.
2. If you continue to touch the
key
Automatic mode (for model C)
Your hood measures the temperature of
key again
the air in the kitchen and the air coming
from your hob by using a sensor. In auto-
matic mode, it determines the required
levels for the temperature of the air from
the hob to match the temperature of the air
in the kitchen and operates at levels de-
termined automatically.
1. To enable the automatic mode touch
2. To turn automatic mode off early touch
EN / 15
ð The lamp changes to the other
colour shade.
will change to the next colour shade
after every 2 seconds. According to the
desired colour shade, stop touching
key when the lamp is in that colour
shade. The colour shade will automat-
ically activate.
You can only change the light col-
our shade while the lamp has high
light intensity.
In the event of a power outage,
your hood will remember the colour
shade set and the lamp will work in
the colour that was last set.
the key.
ð The automatic mode is activated
and operates until the temperature
of the air from the hob equals the
ambient temperature. It will switch
off automatically when the tem-
perature equalizes. You must en-
able automatic mode again to re-
switch it on.
While automatic mode is active,
automatic mode will be cancelled
when you turn the product on and
off at any speed.
the key once more.
EN
PL
key, it
FR