How To Clean Dirty Water Tank - Eureka NEW400 Series Owner's Manual

Hide thumbs Also See for NEW400 Series:

Owner's manual (32 pages)

User manual

Instruction manual (40 pages)

Table of Contents

Available languages

1. Push the button of the dirty water tank downwards

with the thumb and pull it out at the same time to

remove the tank;

2.Hold the tank with one hand and pull out the upper

cover of the tank with the other hand;

3.Pour out the waste water, rinse the tank and

use the tank brush to remove any remaining debris.

4. Take out the filter from the dirty water tank and

remove and rinse any debris from the float.

5. Open the filter holder, and remove the filter；

6. Rinse the filter with clean water and allow to dry

for 24 hours and then reinstall on the float.

7.Once the dirty water tank is cleaned and dry,

reinstall it back onto the machine until you hear a

click, which indicates that the installation is successful.

(It is recommended to hold the machine with the other

hand to avoid tipping when installing the dirty water

tank)

Note:

Empty and rinse out the clean water tank and allowed

to dry before reinstalling. Do not store machine with

water and or cleaning solution in the tanks.

Eureka Customer Service HELPLINE 1-800-282-2886