Advertisement
Quick Links
SOLAR POWERED + LINKABLE
PRESTON
SPOT LIGHT
IP44
WEATHER PROOF
RADAR 360° LIGHTS
POWERED
360° SENSOR
DETECTION ANGLE
LINKABLE
L
LINK ALL OF YOUR
LINK ALL OF YOUR
+
BLUETOOTH READY
REPLACEMENT
T
BATTERY AVAILABLE
ABLE
+ LINKABLE
14 METRE
RE
DETECTION RANGE
N RANGE
+
NO WIRING
NO WIRING
BLUETOOTH
BLUETOOTH
REQUIRED
REQUIRED
LINKABLE
LINKABLE
SMART CONTROL
SMART CONTROL
FUNCTIONALITY
FUNCTIONALITY
+
®
LUMENS
Advertisement
Summary of Contents for Cole & Bright radar360+
- Page 1 ® LINKABLE LINK ALL OF YOUR LINK ALL OF YOUR BLUETOOTH READY RADAR 360° LIGHTS REPLACEMENT NO WIRING NO WIRING BLUETOOTH BLUETOOTH BATTERY AVAILABLE ABLE REQUIRED REQUIRED LINKABLE LINKABLE SOLAR POWERED + LINKABLE POWERED + LINKABLE PRESTON LUMENS SPOT LIGHT IP44 360°...
- Page 2 Introducing troducin ® LINKABLE Radar 360°+ Sensor is the new next-generation adar 360°+ dar 360°+ + Sensor is the new next-generation solar sensor light from Cole & Bright. The new light from Cole & Bright. The new "LINKABLE" technology turns a single security "...
- Page 3 ® LINKABLE AMBIENCE & ULTRA BRIGHT & ULTRA BRIGHT SENSOR MODES Use LOW/HIGH (LH) setting for continuous ambience lighting. When set, the unit will become ULTRA BRIGHT when there is nearby movement to provide safe navigation until the user passes by. MAXIMUM ENERGY SAVING RADAR 360˚...
- Page 4 CHARGING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME 1. Find a location where your light is exposed to full sunlight for at least 8 hours. This will typically require a full day so start your charging in the morning. 2.
- Page 5 LINKING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME Only TWO (2) Lights 1. Make sure your lights are fully charged before you commence the Link procedure. 2. Take the 2 lights you wish to pair and place the solar panel down on a level flat surface.
- Page 6 7. Turn the Secondary unit to OFF position. The light should turn off. 8. Turn the Master unit to OFF position. The light should turn off. Your lights are now linked. When the linking process is completed, the Radar360˚ Linkable lights create a chain of lights so that each light is set off by its nearest linked light.
- Page 7 SMART LIGHT SETTINGS Radar 360˚ is super smart and also has 2 light settings on the same switch that is used to link the lights. Take note of the markings above and to the right of the switch. Goes from NO light to FULL brightness when triggered.
- Page 8 UNLINKING YOUR RADAR 360˚ LIGHTS Radar 360˚ lights can be linked to other Radar 360˚ Linkable lights OR used unlinked on a standalone basis. Standalone Basis If never previously linked simply charge your light and set to the desired Light Settings (see Page 7). Unlinking your Radar 360˚...
- Page 9 LOCATING LIGHTS IN THE NETWORK FOR BEST RESULTS Radar360˚s has ultrasensitive sensors that detect movement at up to 7 metres in any direction from the light. We recommend that you link your lights around 5m apart for best results. If you locate a Radar360˚ light in the vicinity of windows or glass doors, movement indoors will likely trigger the sensors and turn the light on.
- Page 10 If you are doing any of the following go to the locations below for detailed instructions - • LINKING 3 OR MORE LIGHTS (FOR THE FIRST TIME) • ADDING A NEW LIGHT(S) TO THE LINKED NETWORK • ADDING A NEW LIGHT(S) TO THE LINKED NETWORK (but you can’t find the Original Master Light) •...
- Page 11 LINK ALL OF YOUR LINK ALL OF YOUR BLUETOOTH READY LUETOOTH REA RADAR 360° LIGHTS ADAR 360° LIGH Scan the QR code above to find out how...
- Page 12 LUMENS SCAN TO LEARN MORE 50 lumen output 360° sensor angle detection Easy linkable functionality Smart control Easy to use - no mains wiring Sensor range: Linkable 14m dia. For decorative use only KEEP OUT OF REACH OF CHILDREN R-NZ MADE IN CHINA Brunnings Import Export Pty Ltd 3/19-23 Clarinda Road...
Need help?
Do you have a question about the radar360+ and is the answer not in the manual?
Questions and answers