Page 4
Electronic Drum Rack System Thank you for purchasing the Yamaha Electronic Drum Rack System RS100. Before using, thoroughly read this assembly manual, and use this product safely and correctly. I RS100 Rack Stand Parts Side Assembly A (x1) Center Pipe Assembly A (x1)
Page 5
I RS100+Pad Grouping: Setup Example G Pad and Drum Trigger Grouping (option) qDTXTREME wRHP120SD Drum Trigger Module Snare Type Real Head Pad yTP80S/TP80 uPCY80S/PCY80 Drum Pad Cymbal Pad !1 S nare Stand !2 F oot Pedal *SS-642 etc. *DFP-880 etc. * Please use a snare stand for setting the snare drum pad.
Page 6
I RS100 Assembly * A screw driver (+ or -) is necessary to complete the assembly. Please make sure that the fixing bolts on each part, such as clamps, pads, etc. are firmly tightened. Bolts that are too tight or too loose may result in damage to the part or the part dropping. Please use caution. Attach the Center Pipe Assembly A to the upright pipes of the Side Assembly A bly B...