Page 1
Plasma TV Chassis : F72A(N_HD)_C4XX Model Code : PN50C450B1DXZC SERVICE Manual Plasma TV CONTENTS 1. Precaution 2. Product Specification 3. Disassembly & Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram PN50C450B1D Refer to the service manual in the GSPN (see the rear cover) for the more information.
If the measurement is over 1.0V, unplug the AC power cord and change the polarity before reinserting it. Measure the voltage between the chassis and the ground again. Samsung Electronics...
Page 5
Critical safety parts should be bracketed with ( , ). Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. Samsung Electronics...
This is caused by brightness deterioration due to the storage effect of the panel, and to prevent this from happening, we recommend that the brightness and contrast are reduced. (e.g.) Contrast: 25, Brightness: 50 Samsung Electronics...
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...
A rise in temperature within the product may cause fire. 9. When moving a PDP with removable speakers, detach the speakers first before moving the main body. Moving the PDP main body without separating the speakers may cause the speakers to detach, possibly causing damage or injury. Samsung Electronics...
Features Block Specification Major IC NTSC/HALF-NIM Digital/Analog (DTV Built In) TUNER Saturn4 PDP Module Samsung SDI 42” HD U2P Samsung SDI 50” HD U2P 42” HD / 50” HD SAMSUNG ELECTRO MECHANICS SMPS Power mechanics SMPS NTSC 3.58, ATSC Video HDMI...
Page 11
HDMI1 (DVI Compatible) - 480p/720p/1080i/1080p HDMI2 - 480p/720p/1080i/1080p * 480i can be displayed on HDMI, however it is not contained in EDID data AUDIO Input COMPONENT1 - 480i/480p/720p/1080i/1080p COMPONENT2 - 480i/480p/720p/1080i/1080p Audio Output AUDIO (L/R) Speaker Output 10W + 10W (40dB+40dB) New Features Anynet+ Samsung Electronics...
Page 12
HDMI2 - 480p/720p/1080i/1080p HDMI3 (SIDE-AV) - 480p/720p/1080i/1080p * 480i can be displayed on HDMI, however it is not contained in EDID data COMPONENT1 - 480i/480p/720p/1080i/1080p AUDIO Input COMPONENT2 - 480i/480p/720p/1080i/1080p Audio Output AUDIO (L/R) Speaker Output 10W + 10W (40dB+40dB) New Features Anynet+ Samsung Electronics...
Page 13
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem.
Page 14
files to set the following options Start Slide Show, Zoom, Rotate, INFO List. Press the ▲ or ▼ button to select the option, then press the ENTERE button. − After setting the option press the ENTERE button to make a change. Samsung Electronics...
Page 15
Repeat Music is On. Repeat Music is Off. When pressing the � (Play) / � (Pause) button on the remote control while music is playing. When pressing the � (Stop) button on the remote control, the music stops. Samsung Electronics...
Page 16
Repeat the above operation to select desired photos / music files. Selected photos or files are marked with the symbol c . To cancel a selection, press the Yellow button again. Press the � (Play) / ENTERE button to play the selected photos or files. Samsung Electronics...
Page 17
Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a Samsung Home Theater...
Control Audio Surround Sound SRS TruSurround HD SRS TruSurround HD SRS TruSurround XT Speaker Output 10W + 10W 10W + 10W 10W + 10W Double Screen Caption Still Image Features My Color Control Energy Saving Screen Burn Protection Anynet : Feature Included, X: Not Included Samsung Electronics...
Page 19
USB 1 Input USB 1 Input USB 1 Input Speaker/Stand Built-in Speaker Built-in Speaker Built-in Speaker : Feature Included, X: Not Included For the power supply and power consumption, refer to the label attached to the product. 2-10 Samsung Electronics...
* L : Screw Length(mm) 2. Remove the Cover Rear. 6003-001003 3. Detach all connectors from the Main Board. 4. Remove 4 screws. : PH,+,WSP,M3,L8,NI PLT,SWRCH18A * L : Screw Length(mm) 6001-001921 5. Remove the Main Board. <42" PDP> 6001-001921 <50" PDP> Samsung Electronics...
Page 25
Disassembly & Reassembly Description Description Photo 6. Remove 5 screws. : BH,+,B,M4,L12,ZPC(BLK),SWRCH18 * L : Screw Length(mm) 7. Remove the BRACKET-SUPPORT STAND. 6003-001003 8. Remove P-SPEAKER. (No screw for holding) <42" PDP> <50" PDP> Samsung Electronics...
Page 26
* L : Screw Length(mm) 6003-001439 <42" PDP> 14. Remove the SMPS. Wear gloves when handling the power board as there may be some remaining electrical charge in the capacitor. Specifically, avoid touching any part of the 6001-001921 capacitor. 6003-001439 <50" PDP> Samsung Electronics...
Page 27
17. Remove the Logic Main Board. <42" PDP> 6001-001921 <50" PDP> 18. Detach all Connectors from the X-Main Board. To separate the Flat Cable of the X-Board, press the upper and the lower sides of the connector. Samsung Electronics...
Page 29
Disassembly & Reassembly Description Description Photo 21. Detach the 6 scan board connectors from the panel by pulling the holder from both the top and bottom ends. Samsung Electronics...
Page 31
24. Detach all connectors from the Y-Main Board. 25. Remove 5 screws. (42" PDP) Remove 7 screws. (50" PDP) : PH,+,WSP,M3,L8,NI PLT,SWRCH18A * L : Screw Length(mm) 26. Remove the Y-Main Board. 6001-001921 <42" PDP> 6001-001921 <50" PDP> Samsung Electronics...
Page 32
<50" PDP> 29. Remove 4 screws. : BH,+,B,M4,L12,ZPC(BLK),SWRCH18 * L : Screw Length(mm) 30. Remove Holder Module. Please lay the PDP panel face down on a 6003-001003 soft surface when separating front cover. <42" PDP> 6003-001003 <50" PDP> Samsung Electronics...
Page 33
Disassembly & Reassembly Description Description Photo 31. Detach the all connectors from the Function Board. 32. Remove the Function Board. 3-10 Samsung Electronics...
Page 34
Exploded View & Part List 5. Exploded View & Part List 5-1 Exploded View M0013 M0125 M0014 T0044 T0003 M0112 M0523 T0175 T0056 M0027 M0125 This Document can not be used without Samsung’s authorization. Samsung Electronics...
Page 35
HOLDER-WALL;42PC450,ABS HB,BLK(BK0020) M0523 BN96-11138A ASSY STAND P-GUIDE;PC450 42/50,PC+G/F 20 T0003 BN96-12981A ASSY COVER P-FRONT;PC450 50,PMMA+ABS(Ros T0044 BN96-12706A ASSY PDP MODULE P;S50HW-YB06,PL50HF010A, T0056 BN63-06455A COVER-DECORATION;42PC450,PETG,V2,CLEAR(T T0175 BN96-12832C ASSY SPEAKER P;6ohm,4pin,10W,L:350 R:600 Samsung Electronics This Document can not be used without Samsung’s authorization.
Page 36
T0037 BN96-12953A ASSY PDP P-LOGIC MAIN BOARD;S50HW-YB05,P T0941 BN96-12954A ASSY PDP P-E-BUFFER BOARD;S50HW-YB05,PL5 T0942 BN96-12955A ASSY PDP P-F-BUFFER BOARD;S50HW-YB05,PL5 M0014 BN96-14709B ASSY PCB P-MAIN;BN94-03252F,PN50C450B1DX CIS3 BN40-00140B TUNER;DTM-6B/13FCS,VSB HALF NIM,191CH,45 This Document can not be used without Samsung’s authorization. Samsung Electronics...
- Check to see if there is a disconnected or loose cable connection. - Check to see if the cables are connected according to the connection diagram. 2. Check the power input to the Main Board. 3. Check the voltage in and out between the SMPS ↔ Main Board, between the SMPS ↔ X, Y Main Board, and between the Logic Boards. Samsung Electronics...
Page 38
Refer to image of Fig. 4-1. Is the Fuse (F801S) of the SMPS Power Replace Fuse (F801S) Input Part blown? Refer to image of Fig. 4-1. SMPS CN801 Pin 2 : STB 5V Replace the SMPS Pin 1 PS-ON : Check to see if it is 0V? Replace the Main Board Samsung Electronics...
Page 40
CN804 from the SMPS? Refer to image of Fig. 4-2. Does the symptom continue when Replace the Logic Board connecting the power after removing CN802 from the SMPS? Refer to image of Fig. 4-2. Replace the SMPS Samsung Electronics...
Page 42
Check the LED operation of Logic Board. Is it normally operating? Replace the Logic Board (Normal : Blink once a second) Check the LVDS connector. Replace the LVDS Cable Is it connected correctly? Check the each output of the SMPS. Replace the SMPS Are all voltages normal? Replace the Main Board Samsung Electronics...
Page 43
Replace the SMPS (CN801 Pin 7) Refer to image of Fig. 4-3. Is the speaker output terminal Replace the Main Board of the Main Board normal? Replace the Speaker Sound Output Shape Refer to image of Fig. 4-3. Samsung Electronics...
Page 45
The OSD box appears - Check the version of each program but there is no text. - Replace the Main board Upper/Lower Y Buffer defect A blank upper (or lower) - Replace the corresponding upper/ block appears on the lower buffers screen. Samsung Electronics...
Page 46
Replace the Main board appear. The SMPS voltage is incorrect A vertical green line - Adjust the SMPS voltage according appears on the screen. to the voltage printed on the module label X-Main board defect Dim screen - Replace the X-Main board (blurred in red) 4-10 Samsung Electronics...
Page 47
Upper screen is blank ASSY PDP P-Y-MAIN BUFFER BOARD Lower screen is blank ASSY PDP P-E-BUFFER BOARD Corresponding Buffer Board block screen is blank ASSY PDP P-F-BUFFER BOARD Corresponding Buffer Board block screen is blank No Power, Abnormal screen for each input source, PIP screen ASSY PCB MISC-MAIN trouble, Sound trouble The side function key does not work properly. ASSY BOARD P-TOUCH FUNCTION&IR The remote control does not work properly, the LED does not work properly. Samsung Electronics 4-11...
Page 48
3. Prepare a soft pad for disassembling the product. Service adjustment after board replacement <If adjustment equipment is available> 1. PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. 2. Adjust Calibration of Factory Mode for each mode. 3. Adjust White Balance of Factory Mode. <If adjustment equipment is not available> 1. Write down the value of HDMI White Balance of Factory Mode before replacing Board. 2. PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. 3. Set the value of HDMI White Balance with the value written down before. 4-12 Samsung Electronics...
Page 49
OPTION : 00100 10 ADC : HDMI 0 COMP 0 PC 0 AV 0 EDID : SUCCESS HDCP : SUCCESS Current Flash : Flash 0 Build Date : XX-XX-XXXX Date Of Purchase : XX/XX/XXXX ※ The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the improvement of product functions. ※ If you have adjusted the settings in Service Mode, you have to reset the product. Samsung Electronics 4-13...
Page 50
4-2-3 Factory Data 1. Option Item Data Range Factory Reset Type 50HHcD4 42HHcD3 / 50HHcD4 Model PC450 PC550 / PC530 / PC450 / PC430 / PC540 / PC420 / PC410 TUNER Region Etron Etron / Samsung Front Color NONE 2. ADC Menu Item Data Range AV Calibration Success Success/Failure Comp Calibration Success Success/Failure PC Calibration Success...
Page 53
Panel Display Time CHECKSUM 0x0000 View Log Font Data Viewer Dimm Type INT / EXT / INT_NEG / INT_POS Gamma Off / 0.85 / 0.88 / 0.90 / 0.93 / 0.95 / 0.98 Carrier Mute On / Off Anynet+ On / Off HPD Polarity High Devi On / Off Volum Curve NT / EU / EA HotPlug Delay 0 ~ 63 HP Ident Low / High Samsung Electronics 4-17...
Page 54
On / Off LOGIC CONNECT On / Off PATTERN SELECT PANEL VERSION UF1A PANEL INCH 58FHD PANEL TYPE PANEL Control TEMPERATURE LOGIC SW VERSION xx-xx-xx LOGIC SW E7D6H CHECKSUM SAPC_Timer On / Off APC_Spread slow slow / fast Logic USB D/L Failure PLG_Shop 0 ~ 255 4-18 Samsung Electronics...
Page 55
Program Ch. Original Ch / Src Auto PC On / Off Energy Saving Off / Low / Mid / High / Auto Cloning : TV to USB Cloning : USB to TV 10. Shop Option Menu Item Data Range Shop Mode On / Off USB DEMO ON Control (SEC) USB DEMO OFF (SEC) Samsung Electronics 4-19...
Page 56
Carrier Mute Thr Low On / Off Carrier Mute Thr High On / Off [H-dev] Carrier Mute Thr Low On / Off [H-dev] MP3 Level On / Off Master Vol 0x20 0x00 ~ 0xFF PWM Modulation 0xD0 0x00 ~ 0xFF DRC1 Threshold 0 ~ 255 4-20 Samsung Electronics...
Page 57
2 Min / 90 Min OTA limit Time 3 Hour 3 Min / 3 Hour Dynamic CE On / Off 1080p 48Hz On / Off PWM Max 1 ~ 100 Quick Start On / Off DTV LNA Auto Auto / On / Off HDCP Download Test Pattern Samsung Electronics 4-21...
Page 58
Execute calibration in Factory Mode 1. Source : VIDEO 2. Setting Mode : NTSC-M (Mode: #3) 3. Pattern : Pattern #24 (Chess Pattern) 4. Use Equipment : K-7256 or Equipment of equality level 5. Work order 1) Enter by Factory Mode select “2. ADC”. 2) Select “CALIBRATION”. 3) Select “AV CALIBRATION” again in CALIBRATION MENU. 4) After Completing Calibration, come out “Av success”. OSD on the screen (bottom-side) for about 3 seconds. Source AV : NTSC composite, Component : 1280*720/60Hz PC : 1024*768/60Hz < Chess Pattern > 4-22 Samsung Electronics...
Page 59
1. Source : HDMI 2. Setting Mode : 1280*720@60Hz 3. Pattern : Pattern #92 4. Use Equipment : MIK-7256 (MSPG925L) 5. Work order 1) Connect HDMI (DVI) output terminal of MIK-7256 (MSPG925L) to the HDMI input in main set 2) Set the input to HDMI mode 3) Enter the White Balance menu of service mode 4) Contact CA-210 sensor to glass filter < Fixed Position of CA210 Probe > Samsung Electronics 4-23...
Page 61
Troubleshooting 4-2-5 Replacements & Calibration * Check items listed after changing each Replaced assembly items Check Items 1 Auto Program ASSY PCB MISC-MAIN 2 White Balance Adjust SMPS-PDP TV Vs, Va voltage check and adjust ASSY PDP P-X-MAIN BOARD ASSY PDP P-Y-MAIN BOARD ASSY PDP P-LOGIC MAIN BOARD ASSY PDP P-X-MAIN BUFFER BOARD Not to be adjusted ASSY PDP P-Y-MAIN BUFFER BOARD ASSY PDP P-E-BUFFER BOARD ASSY PDP P-F-BUFFER BOARD ASSY BOARD P-TOUCH FUNCTION&IR ※ When replacing the SMPS or PDP panel, you have to check the voltage printed on the panel sticker and adjust Samsung Electronics 4-25...
Page 62
Troubleshooting Voltage Adjustment 1. After replacing the SMPS or PDP panel, you must adjust the voltage referring to the voltage label printed on the panel. (If you do not adjust the voltage, an abnormal discharge symptom may appear.) Board Value SMPS Adjustment Voltage Label Vset SMPS -203 2. A point of adjusting SMPS voltage. VS Test Point VS Adjustment VA Test Point VA Adjustment 4-26 Samsung Electronics...
Page 63
Troubleshooting Y-RR and Y-FR controls - TP Point - Y-RR and Y-FR Y-RR Y-FR Samsung Electronics 4-27...
Page 64
1) Extend 1st Sub-Field of Preset Rising Part. 2) Adjust the scale of scope to 50V, 10us division. 3) Adjust waveform just like the following C(rising edge), D. 3. Falling slope 1) Extend 1st Sub-Field of Main_Reset Falling Part. 2) Adjust the scale of scope to 50V, 10us division. 3) Adjust waveform just like the following C(falling edge), D. 4-28 Samsung Electronics...
Page 65
1) Select the “Setup” menu in the Menu screen 2) Place the cursor over the “Software Upgrade” of “Setup” and press the “Info” key on the remote control. 3) The version of the program is displayed at the bottom of the Menu screen. 2. How to check Program Version on factory mode. Samsung Electronics 4-29...
Page 66
7) The banner OSD “Upgrade version **** to version ****” is displayed. Select “Yes”. 8) The banner OSD “Upgrading now...” is displayed. It takes about 30 sec. (Warning: Don’t remove USB flash driver during upgrade.) 9) The banner OSD “Upgrade is completed” is displayed when the upgrade is completed. 10) Remove the USB flash driver from PDP TV and check the program version. 4-30 Samsung Electronics...
Page 67
Troubleshooting 4-3-3 Logic SW Download (USB) 1. After inserting USB, start Factory mode by using mute+182+power. And follow the process order as below. ※ Shortcut to the Factory mode LOGIC USB D/L. mute + 737 + enter Samsung Electronics 4-31...
Page 73
Power input connect (6 Pin) for Logic Board CN804 Vs (202V),Vg (15V) Power input connect (6 Pin) of SMPS for Y-Drive CN101 Power input connect (12 Pin) from SMPS Speak out connect on Main Board CN401H Image signal (LVDS) connect (31 Pin) for Logic board Samsung Electronics...