Makita UH5580 Instruction Manual page 7

Noise
The typical A-weighted noise level determined according to EN62841-4-2:
Model
UH5580
UH6580
UH7580
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
Work mode: hedge trimming
Model
UH5580
UH6580
UH7580
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Sound pressure level
L (dB(A)) Uncertainty K
pA
(dB(A))
87 3
87 3
87 3
Vibration emission (a ) : (m/s
h
4.4
4.4
4.4
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Hedge trimmer safety warnings
Do not use the hedge trimmer in bad weather con-
1.
ditions, especially when there is a risk of lightning.
This decreases the risk of being struck by lightning.
Keep all power cords and cables away from
2.
cutting area. Power cords or cables may be hid-
den in hedges or bushes and can be accidentally
cut by the blade.
Wear ear protection. Adequate protective equip-
3.
ment will reduce the risk of hearing loss.
7 ENGLISH
Guaranteed Measured sound power
sound level
power level
L (dB(A)) L (dB(A)) Uncertainty K
wA wA
(dB(A))
96 95
96 95
96 95
2
) Uncertainty (K) : (m/s
1.5
1.5
1.5
0.7
0.7
0.7
2
)