Uncanny Brands Star Wars R2D2 - Popcorn Maker Manual

NOTES BEFORE USE

1. Check the package for complete parts.
2. Remove packing materials but keep the rating plate.
3. Check local power mains for a rated voltage OF AC 120V 60Hz.

OVERVIEW

OPERATION

1. Remove the measuring ladle and cover from machine and clean with a damp cloth. Allow to dry thoroughly.
2. Put the cover, chute and measuring ladle back on the machine and slowly pour 1 ladleful of corn into the inner popper.
3. DO NOT use more than 1 ladleful of kernels at a time.
4. The measuring ladle can be used to melt butter or warm oil while the machine is in use.
5. Place a bowl in front of the chute.
6. Plug in the machine, turn on the switch and run for about 3 minutes. There may be unpopped kernels left in the inner popper.

NOTE: The popper is designed to run for no longer than 5 minutes at a time. Allow the machine to cool for approximately 10 minutes in between uses.

1. Never put oil or butter in the inner popper.
2. Never pop more than 100 grams (1 ladleful) of kernels at a time.

MAINTENANCE AND CLEANING

1. Unplug after use.
2. When the machine is completely cooled down, you can clean it. It takes about 10 minutes to cool fully.
3. Take the measuring ladle, chute and cover off of the machine. Be careful not to let oil or butter drop into the inner popper.
4. Clean the loose parts with warm water and detergent and then rinse with clean water. Use a cloth to wipe dry.
5. Pour out any unpopped kernels and wipe the outside of the popper.
6. Never immerse the machine in water or any other liquid.
7. After all parts are cool and dry, store the popper.

Electrical Specifications

North America: 120V, 60Hz, 1100W
UK/Europe: 220240V, 50Hz, 1100W

IMPORTANT SAFEGUARDS

1. This appliance is intended to be used in household and similar applications such as:
   • staff kitchen areas in shops, offices and other working environments;
   • hotels, motels and other residential-type environments.
2. Never operate unattended or let children operate.
3. Only reputable service agents should be used for repair.
4. Never let power cable touch the hot inner popper.
5. Never attempt to put your hand or any object into the inner popper.
6. Place the popper on a level and stable surface when in operation.
7. Never put the popper near combustibles or in an overly damp or hot environment.
8. Only use the recommended methods to clean the machine.
9. Always unplug the machine when not in use.
10. Let the machine cool down before storage.
11. Do not use the machine outdoors or for commercial purposes.
12. If power cable is damaged or machine malfunctions, do not attempt to use it again and send it to a service center for repair.
13. Always follow operation instructions.

6 West 20th Street
Third Floor
New York, NY 10011
sales@pangeabrands.com
www.pangeabrands.com