Advertisement
Secure the rest hook to the
tonearm.
@ Repeat play (auto-repeat)
Set the SIZE selector () ac-
cording to the record size.
Depress
the
REPEAT
switch (8) (ON) (ra).
Push
the
START/CUT
fT]
switch (0, and the platter @
3
starts rotating, the tonearm
d is lowered onto the disk
ee
and play starts. (auto-in)
@ Manual play
| CAUTION
1. Remove the arm rest (3) clamp so that the
tonearm
is able to move lightly when
operated.
2. Set the SIZE selector () according to the
disk-size before automatic play:
3. Do not touch the tonearm (4 or selector
while the tonearm (is moving.
4. The mechanism for auto-in, auto-return,
and auto-repeat operates correctly when
playing an IEC standard record. But if a
non-standard
disk
is set to automatic
play,
the stylus
tip may
be damaged
because the stylus descends outside the
lead-in groove, or the tonearm
may not
return automatically to the rest. Play non-
|
Standard records manually.
When
play
is completed
and the tonearm @ returns
to the arm rest 43), the play
Operation
will
start
again
automatically. (Play can be
repeated countless times, if
so required.)
To release the repeat play
function,
depress
the
REPEAT
switch
(OFF).
When
play is. completed,
the tonearm @® returns to
the arm rest
(3 and the plat-
ter @ stops:
CAUTION
e
You may not be able to perform repeat play
operations with a disk that does not meet
IEC standards.
e When depressing the REPEAT switch (8) dur-
ing play, check that the SIZE selector (is
set to a position which tallies with the disk's
size, and then depress the switch (ON).
CAUTION
Some disks that do not conform to IEC stan-
dards cannot be operated by repeat play.
Operate manually to start disk play between tracks or to play a disk
that does not conform to IEC stan-
dards.
Set the UP/DOWN
switch
to UP (co).
SS
L___I
UP
2 DOWN
1
Move
the tonearm
(4 by
hand to the desired starting
position. (It does not matter
which
position
the
SIZE
selector @) is set to.)
Advertisement
