Lifting Loads - ABB VTR 0 Series Assembly Instructions Manual

Assembly Instructions / VTR..0 ... VTR..1
2 Safety / 2.2 Lifting loads
2.2

Lifting loads

WARNING
Suspended loads
Loads not suspended in compliance with regulations may lead to personal
injury or accidents with fatal consequences.
Loads must always be fastened to technically perfect lifting gear with
u
sufficient loading capacity.
Make sure the load is suspended properly on the crane hook.
u
Do not let anyone stand beneath a suspended load.
u
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
If there are two or more suspension points, the attachment angle of 45° must not be ex-
ceeded. This prevents excessive loading due to diagonal pull.
Use a suitable edge guard if there are sharp edges.
u
The assembly devices must be completely screwed in and must not unscrew during use.
u
Use assembly devices only for the described applications.
u
© Copyright 2020 ABB. All rights reserved. HZTL455311P0026_EN Rev.B July 2020