Table of Contents
Advertisement
Fader switch
When this switch is set to ON, the in¬
dicator illuminates and fader adjustment
can be performed with the Audio Control
Up/Down
switches
Pressing
the
Up
switch increases the volume level of the
rear speakers, and pressing the Down
switch increases the volume level of the
front speakers.
Balance switch
When this switch is set to ON, the in¬
dicator illuminates and balance adjust¬
ment can be performed with the Audio
Control Up/Down switches. Pressing the
Up switch increases the volume level of
the
right
speakers,
and
pressing
the
Down switch increases the volume level
of the left speakers.
[TUNER]: Memory switch
Used to program a desired station into
the memory presets. When this switch is
pressed, an "
8
" display blinks in the
preset channel indicator for 5 seconds.
During this 5-second period, press the
selected switch to store the current listen¬
ing station.
[EQ]: Memory switch
Used to store the adjusted equalizer curve
into memory. When this switch is press¬
ed,
an
"M"
indicator
blinks
for
5
seconds.
During this 5-second period,
press the selected switch to store the cur¬
rent equalizer curve.
Clock switch
When this switch is pressed during Tuner
mode, the frequency display is changed
to clock display. Pressing it again returns
to the frequency display. Even though in
the Clock mode, when tuning is perform¬
ed, the display shows the frequency, and
about 5 seconds later the clock display
resumes.
Loudness switch
When listening at a low volume, press
this
switch.
The
loudness
circuit will
compensate for the human ear's decreas¬
ed response.
_J
(En)
7
Advertisement
Table of Contents
