Specifications - Makita KR401MP Original Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Dimensions: length x width x height (with rotor blades)
Net weight
Cultivating width
Outer diameter of the rotor blade
Gear ratio
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
Approved power unit
This attachment is approved to use only with the follow-
ing power unit(s):
• BUX360, BUX361, BUX362, UX360D, UX361D,
UX362D, DUX60, DUX18, UX01G Cordless Multi
Function Power Head
• EX2650LH Multi Function Power Head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The following symbols are used on the attachment and
this instruction manual. Understand these definitions.
Take Particular care and attention!
Read instruction manual.
Wear protective helmet, eye and ear
protection!
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
Keep your body clear of rotating blades.
Keep bystanders at least 5 m (17 ft) away.
Hot surfaces - Burns to fingers or hands.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
933 mm x 235 mm x 256 mm
Intended use
This attachment is designed for only the purpose of cul-
tivating soil in conjunction with an approved power unit.
Never use the attachment for other purposes. Abusing
the attachment may cause serious injury.
EU Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Cultivator Attachment. Designation of
Type(s): KR401MP.
Fulfills all the relevant provisions of 2006/42/EC and
are manufactured in accordance with the following
Harmonised Standards: EN 709:1997+A4:2009.
Place and date of declaration: Kortenberg, Belgium.
28.6.2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Cultivator Attachment. Designation of
Type(s): KR401MP.
Fulfills all the relevant provisions of S.I. 2008/1597
(as amended) and are manufactured in accor-
dance with the following Designated Standards: EN
709:1997+A4:2009.
Place and date of declaration: Kortenberg, Belgium.
28. 6. 2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
4 ENGLISH
KR401MP
3.2 kg
220 mm
220 mm
1/43