Advertisement
Quick Links
1
Overview
1.1
Introduction
1
- 128x128 TFT display
② - Multi function key
③ - Transistor test area
④ - Zener Diode test area
⑤ - IR receiver window
⑥ - Micro USB Charging Interface
⑦ - Charge indicator LED
1.2
Features
TC-T7-H is a TFT graphic display Multifunction Tester.
Transistor Tester
-
Automatic detection of NPN and PNP bipolar transistors, N-channel and P-channel MOSFETs,
JFETs, diodes (including double diodes), N- and P-IGBTs, resistors (including potentiometers),
inductors, capacitors, thyristors, triacs and battery (0.1-4.5V)
-
Automatic detection of zener diode（0.01-20V）
-
Self test with automatic calibration
IR decoder
-
Support Hitachi IR coding
-
IR waveform display
-
Infrared receiving instruction
Other
-
Measurement results using TFT graphic display(128x128)
-
One key operation
-
Auto Power Off(Timeout Settable)
-
Built-in high capacity rechargeable Li-ion Battery
-
Li-ion Battery voltage detection
-
Support English
Email:sales@aideepen.com
Multi-function Tester (TC-V2.12k)
Advertisement
Related Manuals for Aideepen TC-T7-H
Summary of Contents for Aideepen TC-T7-H
- Page 1 ⑤ - IR receiver window ⑥ - Micro USB Charging Interface ⑦ - Charge indicator LED Features TC-T7-H is a TFT graphic display Multifunction Tester. Transistor Tester Automatic detection of NPN and PNP bipolar transistors, N-channel and P-channel MOSFETs, JFETs, diodes (including double diodes), N- and P-IGBTs, resistors (including potentiometers), inductors, capacitors, thyristors, triacs and battery (0.1-4.5V)
- Page 2 Email:sales@aideepen.com Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source! Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions! Operating Instructions Key operational definitions Multi-function key has two actions: ...
- Page 3 Email:sales@aideepen.com BJT(Bipolar Junction Transistor) Diode 2 Diodes MOSFET 3 / 8...
- Page 4 Email:sales@aideepen.com Thyristor Triac Capacitor Resistor 4 / 8...
- Page 5 Email:sales@aideepen.com Inductor Selftest Short all three Probes, short press the multifunction key, the tester will be automatically calibrates itself. In addition to the calibration process when prompted disconnect external wiring short(Isolate the probes), without the need for other operations.
- Page 6 Email:sales@aideepen.com Warning: Do not carry out other operations in the calibration process, so as not to affect the calibration accuracy! Detect Zener diode In the power off state or the detection is completed, put the Zener diode into the Zener diode test area of test seat, and press the locking handle, short press the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete.
- Page 7 Email:sales@aideepen.com Warning: Adjust the automatic shutdown time required to open the housing, and use an electric soldering iron solder the jumpers. Attention：Please do ESD protection! Manual shutdown Long press the multifunction key to force a shutdown in any state, while the measuring element is included.
- Page 8 Email:sales@aideepen.com Current) ② Double Diodes Forward Voltage 0.01-4.50V Forward Voltage, Reverse Voltage (Transistor test area) Zener Diode 0.01-20V Reverse Voltage (Zener Diode test area) Cg(Gate Capacitance), Id(Drain Current) at JFET Vgs(Gate to Source Threshold Voltag), Uf(Forward Voltage of protecting diode) ④...
Need help?
Do you have a question about the TC-T7-H and is the answer not in the manual?
Questions and answers