Philips CMQ405 - annexe 1 Manual page 6

•
Use speakers with an impedance of 2 to 8 ohm
(4 to 8 ohm when used as a bridged amplifier).
•
Match the "left", "right", "+" and "-" terminals
correctly. Revised polarity may degrade sound
quality.
4 ohm 4 ohm
4 ohm 4 ohm
4 ohm speaker
4 ohm speaker
4 ohm 4 ohm
8 ohm
4 ohm 4 ohm
8 ohm
Connect the amplifier to the car audio with an
RCA cable.
Make the power connection as illustrated
below:
• Connect the ground wire from the
car to the
• Connect the remote wire from the
car audio to the
• With this connection, you can turn
on/off the amplifier with the car
audio.
• Connect the power wire from the
car battery to the
socket.
socket.
socket.
7