Page 1
Register your product and get support at CEM1000 www.philips.com/welcome Quick Start Guide...
Page 6
English Overview of parts 1 These are the supplied parts needed to connect and install this unit. a Main unit b Sleeve c Front panel d Trim plate e Rubber cushion f Disassembly tools g Screws (4 pieces) h Standard ISO connector Select country/region Press to turn on the unit.
Page 7
Place the supplied rubber cushion over the end of the mounting bolt. Slide the unit into the dashboard until you hear a click sound. Reconnect the negative terminal of the car battery. Attach the front panel 6 Attach the trim plate. Insert the right side of the panel in the chassis until it is correctly engaged.