NEC SV8100 Configuration Note page 16

Ip-pbx

Hide thumbs Also See for SV8100:

Table of Contents

From the '28 – Audio Capacity Priority' drop-down list, select your codec preference.

From the '32 – DTMF Relay Mode' drop-down list, select RFC2833.

Figure 3-6: Audio Codec Priority and DTMF Relay Settings

10.

Using the 84-14: SIP Trunk Basic Setup Programming command, in the

'07 – Session Timer value' field, enter the correct value.

Note:

Failure to set this value may result in calls being disconnected after 60 minutes.

11.

In the '17 – Moved Temporarily Support ' field, enter 302 Return.

AudioCodes Mediant E-SBC

NEC SV8100 IP-PBX & BroadCloud SIP Trunk

Figure 3-7: Session Refresh Timer

Document #: LTRT-12530

Table of Contents