Base station (CD496) Handset* Note * In multi-handset packs, there are additional handsets, chargers and power adapters. ** In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
Connect Connect the base station 1 Connect each end of the power adapter to: • the DC input jact at the back of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the back of the base station;...
Page 4
Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Please set the country and language if prompted. 4 Set the date and time.
Page 5
Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press Adjust the earpiece volume Press to adjust the volume during a call. Add a contact in the phonebook 1 Press 2 Select [Option] >...