Sealey FH01 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instruction
gloves
manual
1. SAFETY
Ensure that the lifting hoist is in good working order. Take action for immediate repair. The use of unauthorised parts may be dangerous
9
and will invalidate the warranty.
Operate the lifting hoist in a suitable, well lit work area.
9
Keep work area clean and tidy and free from unrelated materials.
9
Ensure all non-essential persons keep a safe distance whilst lifting.
9
Always screw clamp frame to forks.
9
DO NOT use to lift personnel.
8
DO NOT carry loads over personnel.
8
DO NOT leave suspended loads unattended.
8
DO NOT use the lifting hoist if damaged.
8
DO NOT allow untrained persons to operate the lifting hoist.
8
DO NOT exceed the rated capacity of the lifting hoist.
8
DO NOT manually carry assembled hoist by the hook.
8
When not in use, store in a safe, dry, childproof area.
9
Before lifting the load ensure that the forks are in the lowest practical position, that there are no obstacles which may snag the load
9
whilst it is being lifted and that the area above the forks is clear.
To avoid injury, be fully aware of your own and other persons locations in relation to the lifting, and lowering, of the load.
9
Ensure the centre of gravity always remains inside the forks.
9
DO NOT harness the load at an angle or use any attachments not verified as fit for purpose.
8
DO NOT allow the load to swing during lifting/transporting.
8
DO NOT allow the load to drop suddenly. Lower load with care, ensuring that you are fully aware of the condition of the surface onto
8
which the load is to be placed.
DO NOT use this product to perform a task for which it is not designed.
8
DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.
8
DO NOT climb on the forks.
8
WARNING! Failure to heed safety and warning instructions may result in damage and/or personal injury and will invalidate the warranty.
‰
2. INTRODUCTION
Manufactured from heavy-duty steel for added strength. Easily converts a forklift into a mobile crane. Fitted with opening hook for use
with multiple attachments. Safely secures to forklift using two heavy-duty thumb screws.
3. SPECIFICATION
Model No: .............................................................. FH01
Capacity: ...............................................................1000kg
Fork Opening: ........................................................250mm
Fork Size: ......................................................140 x 65mm
Overall Size: ...................................... 440 x 120 x 160mm
© Jack Sealey Limited
1000KG FORKLIFT LIFTING HOIST
FH01
MODEL NO:
Wear safety
footwear
Original Language Version FH01 Issue: 3 (H,F) 22/05/23