Advertisement
CHARGING INSTRUCTIONS
Place the earbuds in the charging case, and use the Type-C data cable to connect the charging case to
the power supply. When the circuit is turned on, it will automatically charge and the battery indicator will
flash. If the battery indicator does not flash, please check whether the charging case, data cable, and
power supply are properly connected.
When charging is complete, the battery indicator status is always on.
Note:
1. Make sure that the charging contact of the earpiece is pointing downwards so that it is in contact
with the charging point in the socket.
2. Please remove the stickers from the charging slots of the earplugs on both sides before use
INSTALLATION INSTRUCTIONS (EARPIECES CAP, EARTIPS, RETENTION CORD)
Silicone ear cover silicone and eartips specially designed for M20T Earbuds. Do not insert the earplug
directly into the ear if the Silicone ear cover silicone and eartips are not installed
1. Wear the appropriate size ear cover on the earpiece according to the corresponding direction
(note: make sure that the fixing hole is completely consistent with the fixing post)
2. To wear the retention cord, please fix one end of the retention cord to the earplug stem
3. Install ear tips on the ear tips stem
4. Make sure that the ear tips are completely fixed on the ear tip stem
Retention cord
(Optional )
Earplug
Earpiece cap (S/M/L)
Eartips (S/M/L)
Advertisement
