Advertisement
System
Game Assistant
Input
Gaming
Auto Source
Picture
Wide Mode
Color
Hot Key Assignment
Audio
DDC/CI
OSD
HDMI Black Level
System
Quick Start Mode
DSC
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1, HDMI2, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in order.
------------------------------------------------------------------------------------------------------
Note:
Surround application must set Auto Source is"Off".
6.
Wide mode: You can select which screen aspect you are using. The options are Aspect /
Full / 1:1.
7.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Low Blue Light, Advanced Over Drive, VRB) and shortcut keys 2
(Modes,Volume, Brightness, Gamma, Contrast, Low Blue Light, Advanced Over Drive,
VRB).
8.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
------------------------------------------------------------------------------------------------------
Note:
DDC/Cl, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9.
HDMI Black level: Select to set HDMI black level.
10.
Quick start mode: Select Off or On. Turn on to speed up boot speed.
11. DSC: The default is "On"; Support DP has DSC Function.
------------------------------------------------------------------------------------------------------
Note:
DSC = "On" is Default
•
•
DSC = "Off"
•
•
•
Standard
3840×2160
60
HDMI1
Mode
Resolution
Hz
Input
Only Support DP; HDMI to be gray out and unavailable.
Can support max resolution must refer to the "Max Refresh Rate".
For some devices such as mobile phones, DSC needs to be set to
Off to display properly.
Resolutions that can be supported will depend on the capabilities of
the graphics card, and may not be able to display 4K-(144/160)Hz.
Some devices do not support DSC. If the display cannot be
displayed normally, please set DSC to Off.
On
FreeSync Premium
X
Advertisement
