Selection Input Signal - Panasonic TU-PTA500U Operating Instructions Manual

Selection input signal
I
Confirming connection of the connector for desire selection signal.
$
"} IO¢O QLI[- ' I
[_ I::_01VDE _ _l
PC
VIDEO 2
VIDEO 3
L J
A video camera uses
the Video Input 3
terminal on the front
of this unit.
Video camera
VCR
F
Laser Disk Player
DVD Player
This equipment can
also be connected to
the rear terminals. See
Connections for details.
f
Input modes can also be
switched using the INPUT button
on the unit.
C2 C_,
Turning the power on and switching input modes
1 _ Turn this unit on.
2
TV VIOEO
The input mode changes each time this
button is pressed.
TV ]_] *
• When playing 1 I PC
a video "{ VIDEO 1 ]
• When playing 1 [ COMPONENT 2 ]
a DVD -' VIDEO 2 ]
• When playing from 1
LCOMPONENT
1]
a video camera 'q VIDE0 3_ _[ --
No input mode is displayed for terminals with no equipment
connected (Excluding PC)
* PC input can only be selected by using lhe INPUT button on the
front of the luner
* PC input can also be selecled by pressing the PC button on the remote
Note:
When the remote control is unavailable, input modes can also be switched
on front of this unit using the INPUT button.
Operate lhe connected equipment
26