Cable Routing - Dell E80S Series Installation And Service Manual

2. Select iDRAC setting.
3. Select Thermal section.
4. Select Fan Setup setting.
5. At the Fan Speed Offset section, select Low fan speed offset (+15%).

Cable routing

Figure 20. Cable routing - 4 x 3.5-inch cabled SATA drive
Table 10. Connector descriptions for 4 x 3.5-inch cabled SATA drive
From
ODD (Optical disc drive connector)
ODD_PWR + HDD0, HDD1, HDD2, HDD3 (Optical disc drive
power connector, connecting through the drives 0, 1, 2, 3)
HDD0, HDD1, HDD2, HDD3 (Signal connector connecting
through the drives 0, 1, 2, 3)
34 Installing and removing system components
To
SATA_ODD (Optical disc drive SATA connector on system
board)
HDD/ODD_PWR (Drives/Optical disc drive power connector
on the system board)
SL1_PCH_SA1 (Signal connector on system board, cable
marking MB SL1)