Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PIPE LIGHTING PIPE WIDE 63
Summary of Contents for PIPE LIGHTING PIPE WIDE 63
- Page 1 USER PIPE WIDE 63 MANUAL...
-
Page 2: Table Of Contents
CONTENTS Quick setup and wrap guide....................................Product package.......................................... Technical specifications......................................Usage precautions........................................Getting ready for operation...................................... Connecting the controller......................................Controller protective cover ...................................... Underwater usage........................................Controller............................................Controller settings........................................DMX Menu........................................User Menu........................................User Menu: Separate Mode..................................User Menu: DMX_seq....................................User Menu: Overdrive mode................................... User Menu: Max. -
Page 3: Quick Setup And Wrap Guide
QUICK SETUP AND WRAP GUIDE SETUP: 1. Inflate the lamp - press the pump to the valve (page 7, fig.5 ). 2. Flip the corners, add accessoires. 3. Connect the controller (page 9, fig.10-11 ). 4. Have fun! WRAP: 1. Deflate the lamp - open the valve. 2.Protect with cover. -
Page 4: Product Package
PRODUCT PACKAGE 1. Transportation bag 6. Controller in bag Fig. 1. Product package 2. Lamp Head – “PIPE WIDE 63” 7. Air pump 3. Mounting frame 8. Repair Kit 4. AC-Cable 9. Eggcrate (Soft grid) in bag* 5. Extension cable (5m) 10. -
Page 5: Technical Specifications
TECHNICAL SPECIFICATIONS Model PIPE WIDE 63 CCT range, K 2650 – 6500 96/98 Lamp head size 180 x 90 x 20 (L × W × H), cm Lamp head weight, kg Power rating warm channel, W Power rating cold channel, W... -
Page 6: Usage Precautions
DO NOT TOUCH THE LAMP HEAD OR HIGH TEMPERATURES MORE THAN 30 WITH DIRTY HANDS! CHECK THE PRESSURE! DO NOT WEAR GLOVES! AVOID TENSION DO NOT FOLD OR ON POWER AND CONTROL CABLES! STORE WET EQUIPMENT User's Manual | PIPE WIDE 63... -
Page 7: Getting Ready For Operation
GETTING READY FOR OPERATION 1. Open the case, take the lamp head with clean hands. Unroll the lamp head on a flat clean surface without any sharp or hot objects (Fig. 3). Fig. 3 2. The device can be used both inflated and deflated (Fig. 4). Fig. - Page 8 10. If necessary, attach a soft grid/eggcrate and/or skirt (included) to the lamp head. 11. Check the tightness of the nut of the cable valve on the lamp head from time to time. Tighten with handpower only! Do not use wrench! (Fig.9) Fig. 9 User's Manual | PIPE WIDE 63...
-
Page 9: Connecting The Controller
CONNECTING THE CONTROLLER 1. Align the connectors of the signal cable and the controller as shown in Fig.10. Fig. 10 AC-Cable Extension cable 2. Connect the power AC-cable to the connector on the body and the 220/110V socket. 3. Switch on the controller (Fig.11). Fig. -
Page 10: Controller Protective Cover
2 (Fig. 12). Fig. 12 It is also possible to use the flaps of the flap to form a mounting bracket with which the controller can be mounted on a tripod (Fig. 13). Fig. 13 User's Manual | PIPE WIDE 63... -
Page 11: Underwater Usage
PLEASE MAKE SURE TO READ THESE INSTRUCTIONS BEFORE UNDERWATER USAGE. You can use Pipe Lighting products under water. To do so please take all the air out of the fixture with the back side of the air pump. Make sure to fix the lamp head properly under water using weights and/ or frame. -
Page 12: Controller
Front panel Rear panel 1. CRMX antenna 2. OLED Display 3. Link Button 4. Color Encoder 5. Power Encoder 6. DMX Input 7. DMX Output 8. Power Input 9. Power Switch 10. LED Output User's Manual | PIPE WIDE 63... -
Page 13: Controller Settings
CONTROLLER SETTINGS 1. After switching the unit on, you will see the main screen (Fig.16). Fig. 16 2. The left encoder controls the color temperature. The right encoder controls the brightness of the unit (Fig. 17). Fig. 17 3. Pressing on the right encoder shows the internal temperature of the controller (Fig. 18). Fig. -
Page 14: Dmx Menu
The DMX address must be set to control the unit remotely. The address has the same value for both wired and wireless DMX. Pipe Lighting controller uses 2 DMX-channels (except in Separate Mode): one for the color temperature and one for the brightness. -
Page 15: User Menu
CONTROLLER SETUP / User Menu The User menu provides access to the parameters for different operation modes and features of the controller (Fig.22). Fig. 22 To access the User menu: 1. Switch off the device. 2. Press and hold the left encoder button. 3. -
Page 16: User Menu: Separate Mode
3. After returning to the User menu, select Exit to save the settings (Fig.25). Fig. 25 4. Now you are using the Separate mode (Fig.26). Fig. 26 The left encoder controls the brightness of tunsten LEDs. The right encoder controls the brightness of daylight LEDs (Fig.27). User's Manual | PIPE WIDE 63... - Page 17 CONTROLLER SETUP / User Menu: Separate Mode Fig. 27 The upper left corner shows the actual color temperature in K (Kelvin). The temperature is calculated automatically according to the calibration of the unit and the set tungsten to daylight LED ratio (Fig.28). Fig.
-
Page 18: User Menu: Dmx_Seq
DMX Addressing) (Fig.30). Fig. 30 2. Rotating the left encoder toggles between valid parameter options (Fig. 31). Fig. 31 3. After returning to the User menu select Exit to save the settings(Fig. 32). Fig. 32 User's Manual | PIPE WIDE 63... -
Page 19: User Menu: Overdrive Mode
CONTROLLER SETUP / User Menu: Overdrive mode 1. Pressing on the left encoder calls the Overdrive menu (Fig.33). Fig. 33 2. Rotation of the left encoder toggles between the menu options. Pressing the encoder confirms the selected parameter (Fig.34). Fig. 34 3. - Page 20 4500 5000 5500 Reaching 200% maximum power is only possible in the middle of the color temperature range. To simplify the search, the middle of the range is invertibly illuminated (Fig. 38). Fig. 38 User's Manual | PIPE WIDE 63...
-
Page 21: User Menu: Max. Power
CONTROLLER SETUP / User Menu: Max. Power 1. Pressing on the left encoder brings up a menu for selecting the Power_max parameter value (Fig.39). Fig. 39 2. You can turn the left encoder and toggle between the menu options. Pressing confirms the selected parameter (Fig.40). -
Page 22: User Menu: Step Change Ratio
2. Turning the left encoder toggles between the menu options, allowing temperature step values: 10, 25, 50, 100 (Fig.44) Fig. 44 3. After returning to the User menu select Exit to save the settings (Fig.45). Fig. 45 User's Manual | PIPE WIDE 63... -
Page 23: User Menu: Smooth Transition
CONTROLLER SETUP / User Menu: Smooth Transition 1. Pressing on the left encoder displays the menu to select the values of parameter dt_out_stp (Fig.46). Fig. 46 2. When dt_out_stp is set to 0 ms, the transitions between the different controller parameter states are instant and you can visually see a step change in brightness and temperature at low power values. -
Page 24: User Menu: Reset
CONTROLLER SETUP / User Menu: Reset 1. Pressing on the left encoder resets all the controller settings to the factory settings. The calibration factors are set to default corresponding the model (Fig.49). Fig. 49 User's Manual | PIPE WIDE 63... -
Page 25: Resetting Crmx Network Adapter
RESETTING CRMX NETWORK ADAPTER PipeLighting dimmers use a built-in LumenRadio® radio module with CRMX protocol. In case of signal loss or connection failure it is necessary to reset the network adapter of the device. To do so, press and hold for 5 seconds the "Link" button under the antenna on the front panel of the dimmer, when the device is switched on (Fig. -
Page 26: Finishing Work And Packing Order
2. Air pump. 3. AC-cable. 4. Extension cable. 5. Skirt in bag. 6. Mount frame in bag. 7. Lamp head (rolled with 5 cm in diameter). 8. Soft grid in bag (if it is provided). User's Manual | PIPE WIDE 63... -
Page 27: Warranty
WARRANTY The Supplier's warranties are valid for 12 (twelve) months from the date of delivery for the new Goods. The Supplier guarantees stable operation of the Goods during the warranty period if the Buyer fulfils the conditions of the Goods operation. In case of non-compliance of the Goods with the declared technical requirements or after the Buyer's expertise on the presence of implicit causes and detection of a manufacturing defect, the Supplier is obliged to eliminate the detected defects or replace the Goods with a new one during the warranty period. -
Page 28: Storage And Maintenance
Repair Kit to cover the hole. Make sure, the place, where the sticker would be applied, is clean and dry. You do not need any additional devices as iron to put the sticker – it is self adhesive. User's Manual | PIPE WIDE 63... - Page 29 Made in Germany Pipe Lighting GmbH Luisenweg 109 20537 Hamburg, Germany +49 151 299 31 049 +49 40 723 77 273 info@pipelighting.com www.pipelighting.com...
Need help?
Do you have a question about the PIPE WIDE 63 and is the answer not in the manual?
Questions and answers