Page 1
TRIAX 300 • TRIAX SPEED 100 • TRIAX SPEED 50 • TRIAX SPEED 10 +/ _ to change value Select Day or Select 12 or Month Display 24 Hour Clock Continue to Next Setting In TIME mode you can set time and calendar information within two time zones.
RUN mode can be used to capture lap and total time data down to 1/ 100th of a second. The convertible display can be easily switched between total time, lap time or both simultaneously during a workout. NOTE: The TRIAX SPEED 10 does not have a convertible display VIEW button changes the convertible display STOP Run...
Page 3
RUN mode has a PACE function which compares actual lap and total times to preset PACE target times NOTE: The TRIAX SPEED 10 does not have the PACE function EXIT back to RUN mode Turn PACE targets ON / OFF 2 sec Set Segment 1 Seconds, Minutes and Hours...
Page 4
View PACE target times before starting workout 5 sec CLEAR ALL PACE segments 2 sec In INTERVAL mode you can Set Segment 1 Seconds, set five repeating segments Minutes and Hours for customized interval training. ( 19:59' 59" maximum ) NOTE: The TRIAX SPEED 10 does not have INTR mode Set up to 5 segments...
Page 5
In DATA mode you can review workout data saved from RUN mode Select RUN DATA mode records Total Time, All Lap Times, Best Lap and Average Lap DATA mode with the PACE targets turned ON 5 sec CLEAR ALL Runs CLEAR Selected Run 2 sec...
Need help?
Do you have a question about the TRIAX 300 and is the answer not in the manual?
Questions and answers