Troubleshooting - Panasonic CF-VCW281 Operating Instructions Manual

Troubleshooting
en — TT rrr ee— SE TT EE o am a ma ara ma ——— —— sv
The computer does not recognize the
CD-R/RW Drive Pack.
O Check the settings by following the instruc-
tions in "Software Preparation".
6 Is the CD-R/RW Drive Pack properly
mounted in the multimedia pocket?
The MP indicator (MA) does not light. Is the disc loaded on the tray correctly?
Cannot play disc or read data from it, Is the disc bent, scratched, or dirty?
Cannot eject disc. Is the computer powered on?
To remove a disc when the computer is pow-
ered off, insert a sharp object such as the bent-
out tip of a paper clip into the emergency hole.
Pushing it completely to the end will free the
tray so that it can be pulled out.
Emergency Hole
A blue background appears on the screen | Did you open the CD-R/RW drive or remove
with the MPEG image. the MPEG disc while it was operating?
Re-insert the MPEG disc and close the CD-R/
RW drive. Press (Enter).
The disc tray does not close. Did you touch the eject button when you close
the tray?
The computer hangs or reboots. @ Is an external CD-ROM drive or DVD-
ROM drive connected?
When the CD-R/RW Drive Pack is in-
stalled, do not use an external CD-ROM
drive or DVD-ROM drive.
@ Was the computer turned off before the in-
stallation/removal of the CD-R/RW Drive
Pack?
The computer needs to be off so that the
CD-R/RW Drive Pack can properly initial-
ize during Windows startup.
10