Table of Contents
Advertisement
3 Operation
Mandatory Functions
One of the following functions can be assigned to the remaining switch. The functions that are available
depend on the version of your system.
Optional Functions
3.2
Wireless Foot Switch Indicators
The battery indicator descriptions in the following table are based on typical usage. The status of an
indicator depends on the model of your foot switch. For more information about the model types, see
Equipment Labels (page
If the wireless foot switch is not in use, it enters sleep mode and all indicators are switched off. To wake
the wireless foot switch, move it or press any pedal.
Battery Indicator
Green
Red
Red, flashing
every 0.5s
Red, flashing
rapidly
Green,
flashing
Red and
green (at
startup)
Wireless Foot Switch Addendum
Perform fluoroscopy on the frontal channel
(type 1 wireless foot switch)
Perform fluoroscopy on the frontal channel
(type 2 wireless foot switch)
Perform fluoroscopy on the lateral channel
(type 1 wireless foot switch)
Perform fluoroscopy on the lateral channel
(type 2 wireless foot switch)
Fluoro Store function
Prepare and perform single-shot exposure
15).
Type 1
Battery charge level
is between 25% and
100%.
Battery charge level
is between 0% and
25%.
Not applicable
Not applicable
Battery is charging.
Not applicable
Type 2
Battery charge level should
provide more than 40 hours of
use.
Battery charge level should
provide 20 to 40 hours of use.
Battery charge level will
provide less than 20 hours of
use.
Battery charge level is less than
1.5%. Charge the wireless foot
switch battery before use.
Battery is charging.
A critical error has occurred.
9
Wireless Foot Switch Indicators
Select channel (type 1 wireless foot switch)
Select channel (type 2 wireless foot switch)
Perform biplane fluoroscopy
Prepare and perform exposure
Switch the room light on and off
Copy as photo image function
Action
No action required. The foot switch is
ready to use.
Type 1: Charge the battery. See
Charging the Wireless Foot Switch
Battery (page
11).
Type 2: The foot switch can be used,
but it is recommended to charge the
battery. See
Charging the Wireless Foot
Switch Battery (page
11).
Charge the battery. See
the Wireless Foot Switch
Battery (page
11).
Charge the battery. See
the Wireless Foot Switch
Battery (page
11).
See
Charging the Wireless Foot Switch
Battery (page
11).
Disconnect the charger if it is
connected. Switch the wireless foot
switch off and then on again, or
perform a cold restart of the X-ray
system. If this does not resolve the
issue, use the wired foot switch for
the procedure and contact technical
support.
Philips 4523 001 21821
Charging
Charging
Advertisement
Table of Contents
