Anderic RRTX015 User Manual

i.

Product Features:

The Anderic RRTX015 ceiling fan remote control is for use with three-speed ceiling fans. This
remote is not universal and can only pair to supported ceiling fans that require the A25-TX015
remote control. The Anderic RRTX015 remote control allows easy learning on your existing ceiling
fan and supports dimmable and non-dimmable light bulbs. The RRTX015 features also include
adjusting the ceiling fan's speeds, light dimming, light delay-off, and fan forward and reverse.
ii. Pairing instructions:
Install a 12V battery (not included) into the transmitter, matching polarity.
a. Cycle the power to the fan using either the wall switch or the
circuit breaker box, and within 30 seconds of restoring the power
to the fan,
b. Press and hold the "HI" and "LOW" buttons for 5 seconds, then,
c. Tap the "LEARN" key on the back of the transmitter.
Indication of successful pairing: the fan will turn to LOW speed and
incandescent/CFL is OFF.
If the fan does not respond, try pressing the keys on the remote to see if it
will operate. If not, try repeating the steps above.
iii. Using the remote (Figure 1 & 2)
See the below key function descriptions.
•
①②③: Used for toggling the fan speeds; HIGH /MEDIUM /LOW
speed.
•
④: FAN/OFF: Used to turn the fan off.
•
⑤: LIGHT DELAY OFF: Pressing this enters the light delay-off mode;
press the Light On/Off key to exit.
•
⑥: LIGHT ON/OFF/DIMMING:
Press and release immediately to turn ON/OFF the light.
o
Press and hold to achieve the dimming function.
o
•
⑦: Season slide switch
Slide the switch depending on the direction you wish the air to flow.
Note: Wait for the fan to stop before reversing the switch.
In warmer weather, counterclockwise rotation creates a
o
downward airflow, which cools the air—slide switch to the
left, indicated by the
In cooler weather, clockwise rotation of hot air from the
o
ceiling into the room. Slide the switch right, indicated by the
icon.
•
⑧: D/CFL SWITCH
Slide the switch on the back of the transmitter depending on the light bulbs installed. You have
the option of dimmable or non-dimmable light bulbs:
For Dimmable bulbs, such as dimmable LED and Incandescent:
o
§
For non-dimmable bulbs, such as CFL bulbs:
o
ANDERIC RRTX015 User Guide
®
icon.
Set the switch to the left, labeled with the "D" marking.