Fujitsu CELSIUS W5011 Operating Manual page 37

No. indicator
1 Drive indicators
2 Indicator for optional
components, e.g.
SmartCard reader
3 Power-on indicator
4 Hard disk indicator
Fujitsu
Description
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
The indicator lights up when the optional component, e.g. the
SmartCard reader, is accessed.
Warning: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
• Indicator is illuminated:
The device is switched on.
• The indicator flashes (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off or disconnected from the mains. If
the device is ready for operation, it can be switched on with
the ON/OFF switch.
The indicator lights up when the hard disk drive of the device is
accessed.
Operation
33