Saving And Recalling Custom Panel Setups - Registration Memory; Registering Panel Setups - Registration Memory - Yamaha PF-1000 Owner's Manual

Saving and Recalling Custom Panel Setups — Registration Memory
Registration Memory is a powerful feature that lets you set up the PF-1000 just as you want — selecting specific voices,
styles, effect settings etc. — and save your custom panel setup for future recall. Then, when you need those settings,
simply press the appropriate REGISTRATION MEMORY button.
FADE IN/OUT POP & ROCK POP BALLADS DANCE
ACMP AUTO FILL IN
BREAK INTRO
START/STOP
MIN MAX
MASTER VOLUME
METRONOME
Registering Panel Setups — Registration Memory
This shows you how to register your custom panel settings to the REGISTRATION
MEMORY buttons. Make all the settings you want with the panel controls, and Registration
Memory will "remember" them for you.
1
Set up the panel controls as desired.
For a list of the settings that can be registered, refer to the separate Data List
(Parameter Chart).
2
FREEZE
3
Select the desired parameter groups
for the settings you want to register.
You can also use the [DATA ENTRY]
dial to navigate in this display. To
register a parameter group, checkmark
the corresponding box. Groups left
without checkmarks will not be included
in the Registration Memory setting.
This allows you to maintain certain
settings, even when switching among
Registration Memory presets. You can
also use the Freeze function (page 84)
to override the Registration Memory
changes — letting you prevent certain
panel settings from being changed.
Press the desired number button for registering the settings.
E
ND
FREEZE
Indicator is green......The panel setting is registered, but not selected.
Indicator is red .........The panel setting is registered and is currently selected.
Indicator is off ..........The panel setting is not registered.
The registrations registered here will be lost when the power is turned off, unless you perform
the Save operation explained on the next page.
82
PF-1000
LCD
CONTRAST
MENU
DEMO
A
HELP
B
C
FUNCTION
D
E
DIGITAL
STUDIO
SOUND
CREATOR
DIGITAL
MARCH & EXTRA TRACKS TRACK2 TRACK1 RECORDING
SWING & JAZZ R & B COUNTRY LATIN WORLD WALTZ BALLROOM PIANIST USER STYLE L R
MIXING
STYLE CONSOLE
REC TOP START/STOP REW FF
OTS LINK REPEAT
PART
NEW SONG SYNC.START
SONG
MAIN ENDING/rit. SYNC.STOP SYNC.START START/STOP
A B C D TAP TEMPO
RESET RESET
STYLE CONTROL TRANSPOSE
TEMPO
1 2 3 4
REGISTRATION MEMORY
1 2
1 2 3 4
REGISTRATION MEMORY
BACK NEXT
FREEZE
VOICE
PART
F
ON/OFF
LAYER
G
LEFT
H
I
MUSIC
FINDER
J
ENTER
DATA ENTRY
BALANCE
DIRECT
ACCESS EXIT
CHANNEL 1 2 3 4 5 6 7 8
ON/OFF
PART
5 6 7 8 MEMORY
3 4 5 6 7
5 6 7 8 MEMORY
1 2 3 4 5 6
REGISTRATION MEMORY
HARMONY/
REVERB DSP VARIATION ECHO MONO LEFT HOLD 1 2 3 4
VOICE EFFECT ONE TOUCH SETTING
PIANO & ORGAN &
PIANO
HARPSI. E.PIANO ACCORDION PERCUSSION GUITAR BASS
BRASS WOODWIND STRINGS CHOIR & PAD SYNTH. XG USER FREEZE 1 2 3 4 5 6 7 8 MEMORY
VOICE REGISTRATION MEMORY
Keep in mind that songs or
styles on disk cannot
registered to Registration
Memory. If you want to
register a disk-based song
or style, copy the relevant
data to "USER" in the
SONG/STYLE display
(page 38) and register the
data separately.
F
Cancels the registration
and returns to the MAIN
G
display. You can also use
the [EXIT] button.
H
I
J
Enters a checkmark to the
selected box. You can also
use the [ENTER] button.
8
Removes the checkmark from
the selected box. You can also
use the [ENTER] button.
Any data that was previ-
ously registered to the
selected REGISTRATION
MEMORY button (indicator
is green or red) will be
erased and replaced by the
new settings.
7 8 MEMORY