Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for thomann STARIVILLE Wireless DMX Transceiver G5
Summary of Contents for thomann STARIVILLE Wireless DMX Transceiver G5
- Page 1 Wireless DMX Transceiver Transceiver...
- Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 26.09.2023, ID: 573998...
-
Page 3: Table Of Contents
Table of contents Table of contents General information..........................4 1.1 Symbols and signal words....................... 4 Safety................................6 Features................................9 Installation..............................10 Starting up..............................12 Connections and operating elements................... 15 Operation..............................18 Technical specifications........................20 Plug and connection assignments....................21 Troubleshooting............................22 Protecting the environment...................... -
Page 4: General Information
Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. - Page 5 General information Warning signs Type of danger Warning – high-voltage. Warning – danger zone. Wireless DMX Transceiver G5 Transceiver...
-
Page 6: Safety
Safety Safety Intended use This device is intended for the wireless transmission of DMX signals in lighting systems. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. - Page 7 Safety DANGER! Danger to life due to electric current! Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged. DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death.
- Page 8 Safety NOTICE! Damage to the device due to high voltages! The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐ tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device.
-
Page 9: Features
Features Features Special features of the device: Switchable operating mode: Transmitter or receiver Wireless signal transmission in the 2.4 GHz frequency range (ISM band) without interfer‐ ence Toll-free operation in the EU and NAFTA countries, no permit required Operation via button on the unit Three LEDs for monitoring the operating status Lockable input socket (Power Twist) for mains power supply Mounting bracket and power cable supplied... -
Page 10: Installation
Installation Installation Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. - Page 11 This equipment uses a frequency range that is free of charge and registration within the European Union (EU). For more information, please visit: http://www.thomann.de.. When operating, make sure that transmitter and receiver are set to the same channel. Never set more than one transmitter to the same channel.
-
Page 12: Starting Up
Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Wireless DMX Transceiver G5 Transceiver... - Page 13 Starting up Point-to-point connection Connect a device configured as transmitter to the DMX output of your DMX controller and a device configured as receiver to the DMX input of the first DMX device in the DMX chain that is to be controlled. In this point-to-point configuration the DMX signal from one transmitter is sent to one receiver.
- Page 14 Starting up Point-to-multipoint connection Connect a device configured as transmitter to the DMX output of your DMX controller and a device configured as receiver to the DMX input of the first respective DMX device in the DMX chains that are to be controlled. In this point-to-multipoint configuration the DMX signal from one transmitter is sent to several receivers.
-
Page 15: Connections And Operating Elements
Connections and operating elements Connections and operating elements Front panel ö & 1 Antenna 2 [POWER] | Control LED for the power supply. Lights when the device is connected to the power supply. Wireless DMX Transceiver G5 Transceiver... - Page 16 Connections and operating elements 3 [DMX] | Control LED for the operating status. Meaning if the device is operating as the transmitter: Constant light: Transmission path active, DMX signals are being sent. Flashes every 1.5 s: Transmission path not active. Flashes every 1.0 s: Transmission path active, no DMX signal present.
- Page 17 Connections and operating elements Rear panel 7 Lockable powerCON input socket (NAC3FA) for mains connection. 8 Fuse holder. 9 [DMX IN] | DMX input. 10 [DMX OUT] | DMX output. Wireless DMX Transceiver G5 Transceiver...
-
Page 18: Operation
Operation Operation Switching operating mode of transmitter / receiver Press and hold [FUNCTION] while switching the device on, then hold for another three seconds. If, after you release [FUNCTION], the [Mode] and [DMX] LEDs do not light up, or if the [DMX] constantly flashes quickly, the device is configured as a receiver. - Page 19 Operation Cancelling active connection Receiver: Press [FUNCTION] on the receiver for about five seconds. ð The connection from the transmitter to this receiver is being interrupted. The [DMX] LED goes out. Transmitter: Press [FUNCTION] on the transmitter for about five seconds while the device is on. ð...
-
Page 20: Technical Specifications
Technical specifications Technical specifications Frequency band 2.4 GHz Range (outdoors) approx. 500 m Input connections DMX control XLR chassis socket, 3-pin Power supply Power Twist Output connections DMX control XLR chassis socket, 3-pin Supply voltage 230 V 50 Hz Power consumption Dimensions (W ×... -
Page 21: Plug And Connection Assignments
Plug and connection assignments Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’... -
Page 22: Troubleshooting
Troubleshooting Troubleshooting NOTICE! Data transfer errors due to improper wiring! If the DMX connections are wired incorrectly, this can cause errors during the data transfer. Do not connect the DMX input and output to audio devices, e.g. mixers or ampli‐ fiers. - Page 23 Troubleshooting Symptom Remedy No response to the DMX con‐ 1. Check the power supply of the transmitter and troller receiver. 2. Make sure that transmitter and receiver are operating in the same frequency range. 3. Check the DMX connections and cables for proper connection.
- Page 24 5. Interference can also be caused by other radio or in- ear systems. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Wireless DMX Transceiver G5 Transceiver...
-
Page 25: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. - Page 26 Notes Wireless DMX Transceiver G5 Transceiver...
- Page 28 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the STARIVILLE Wireless DMX Transceiver G5 and is the answer not in the manual?
Questions and answers