Viewing A Video From An External Component - Samsung DVD-L100 Manual

I ENGLISH _
Viewing a Video from an External Component
Use the procedure below to view a video from a VCR or camcorder on your DVD player
,- -,---!
• mm I
m g I
,F ,&
To view a video from an external component
1 Connect the external component according to the procedure outlined on page 17
2 Turn on the external component
3 Turn on the DVD player
4 Press the DVD/M STICK/AV-IN button to set the AV-IN mode
5 Press the PLAY button on the external component
Caution
• Power is not supplied from this device to the connected DVD player
• When not using your DVD player, always remove all connecting cables from the video or
audio input/output jacks
• If no signal is input for more than 5 m_nutes whde in the input mode, th_s unit enters
the standby mode
If the player is left in pause mode
• If the PAUSE mode continues for more than 5 minutes, the unit will be automatically switch to 'STOP'
• If the STOP' mode continues for more than 1 minute, it will automatically switch to
FADE IN FADE OUT'
• If the FADE IN FADE OUT' mode continues for more than 4 minutes, the power will be shut off auto
matically
AV-IN