Preset Tuning - Kenwood KT-7020 Instruction Manual

Operation instruction
KENWOOD AM-Fid STEREO TUNER KT-7020
Onn ~ mse O
O ~— nv Q
wn rane ©
eee.
POWER
77888 Bs
onrne econ
Preset station key (1 ~ 0)
Preset station key
(com
(Emm)
(cm)
E43 |
MEMORY key
PROGRAM
Press the desired preset
station key.
Preset A/B select key
® Select preset group A or B by the A/B select key.
10 «t-7020 (en)
MEMORY key
TUNING knob
@ Preset tuning
1. Receive a station either by auto tuning or manual
tuning.
2. Select preset group A or B with the preset A/B select
key.
® A total of 20 stations can be preset in memory: 10 in
group A, and 10 in group B.
3. Press the MEMORY key. (Press for more than 1 sec-
ond.)
®@ The MEMORY indicator lights for about 5 seconds.
4. While the MEMORY indicator lights, press one of the
preset station keys.
The MEMORY indicator goes off, the preset indicator
lights up, and the frequency of the received station is
preset under the selected key.
@ How to receive a preset station
1. Select preset group A or B with the preset A/B select
key.
2. Press the preset key under which the frequency of the
desired station has been preset.
3. Adjust the volume and tone on the amplifier.
The preset memory contents are backed up for at least
three days even after the power cord is disconnected.