Yamaha Clavinova CVP-103 Reference Booklet page 41

• 6 x 20 mm round-head screws
• 4 x 12 mm round-head screws
• 4 x 20 mm tapping screws
• 6 x 16 mm flat-head screws
X
Attach the side panels (D) to the pedal box (C).
Before installing the pedal box, untie and straighten out the
bundled cord attached to the bottom of the pedal box. Don't
discard the vinyl tie, you'll need it later in step B.
Place the pedal box on top of the brackets attached to the
side panels (D), and attach using the four 6 x 20 millimeter
round-head screws 1 — two screws on each side. Make
sure the pedals extend in the same direction as the side panel
feet.
2
x 4 1
x 2 2
x 4 3
x 4 3
• 6 x 20 mm round-head screws 1
C
CVP-109/107/105/103/700
41