Advertisement
Quick Links
Advertisement
Related Manuals for Ring Rescue Dolphin RDD-A1-UC
Summary of Contents for Ring Rescue Dolphin RDD-A1-UC
- Page 1 Technical Reference Manual Ring Rescue | Dolphin Ring Cutter RDD01-P078-V4...
- Page 2 Ring Rescue | Dolphin Ring Cutter RDD-A1-UC FEI Number: 3015542886 Health Canada MDEL Number: 9115 US and International Patents Pending Ring Rescue Inc. 20 Orion Court Dartmouth, Nova Scotia Canada B2Y 4W6 1 (888) 640-7464 ringrescue.com Made In Canada with domestic and imported parts RDD01-P078-V4 ringrescue.com...
- Page 3 finger ring entrapment, where ring removal is deemed necessary, and use of a Compression Device (such as the Ring Rescue Compression Device) is either contra-indicated, unsuccessful with ring removal, "ON"/"OFF" (push button) or otherwise not recommended. It is intended to...
- Page 4 The decision to proceed with ring cutting using the Ring Rescue Dolphin Internally Powered Equipment: Ring Cutter indicates that this is understood, and Equipment able to operate from that ring repair may or may not be possible.
- Page 5 A list harm. of improper uses can be found in the Ring Rescue This device has been designed to reduce burn Dolphin Ring Cutter Quick Start Guide and risks during ring cutting operations, however, it is tutorials.
- Page 6 Cutter if not operated or maintained cleaning of the metal finger guard is included according to all instructions provided with with the Ring Rescue Kit. See the Ring Rescue the product, including but not limited to Dolphin Ring Cutter Quick Start Guide and...
-
Page 7: Product Overview
Product Overview Thumbscrew Removal Assist Work / Information Light AssureCUT Cutting Disc Thumbscrew Finger Guard Trigger (Start/Stop Cutting) Progress Indicator Close Button - (Finger Guard Close) Open Button - (Finger Guard Open) Status Light Power Supply Connector Battery Charge Level Indicator Main On / Off Switch RDD01-P078-V4 ringrescue.com... -
Page 8: Information Signals
Improper use has not been corrected. The device will pause operation for 10 seconds FLASHING Lubrication Reminder: Apply Ring Rescue Ring Lubricant to cutting disc Critically low battery. Note: When the battery is critically low, the disc will not spin but Open/Close buttons still function. - Page 9 Maximum Ring Dimensions The Dolphin Ring Cutter has been specifically designed to cut finger rings up to US size 13.5. For uncommon rings, please use the reference below to determine if the Dolphin is suitable for the ring being cut. Aside from ring size, ring width is the most common measurement given.
- Page 10 IMAGE 1 IMAGE 2 Cut Direction 1 - Initial Cut Cut Direction 2 - Finishing Cut Rings with Unique Geometry (Championship Style Rings) As with standard rings, always attempt to separate cuts by 180 degrees. When ring geometry restricts the maximum separation angle between the 2 cuts, always separate the cuts as much as possible.
-
Page 11: Specifications
Specifications Warning ALWAYS consult labeling that accompanies accessories for instructions on proper use and storage. Caution ALWAYS store this equipment within the specified environmental limits described in this manual. Note Specifications are approximate and may vary between devices or as a result of power supply fluctuations. Model: Dolphin Ring Cutter (REF - RDD-A1-UC) - Page 12 Environmental Conditions: Operation Transportation and Storage Ambient Temperature Limitation Relative Humidity Atmospheric Pressure RDD01-P078-V4 ringrescue.com...
- Page 13 Specifications (continued) Guidance and manufacturer’s declaration - electromagnetic emissions The Dolphin® Ring Cutter (REF RDD-A1-UC) is intended for use in the electromagnetic environment specified below. The customer or the user of the Dolphin® Ring Cutter (REF RDD-A1-UC) should assure that it is used in such an environment. Emissions Test Compliance Electromagnetic environment - guidance...
- Page 14 Specifications (continued) Guidance and manufacturer’s declaration - electromagnetic immunity The Dolphin® Ring Cutter (REF: RDD-A1-UC) is intended for use in the electromagnetic environment specified below. The customer or the user of the Dolphin® Ring Cutter (REF RDD-A1-UC) should assure that it is used in such an environment. NOTE: The values provided in the table below have changed due to 60601-1-2 4th Edition requirements.
- Page 15 Specifications (continued) Guidance and manufacturer’s declaration - electromagnetic immunity The Dolphin® Ring Cutter (REF RDD-A1-UC)) is intended for use in the electromagnetic environment specified below. The customer or the user of the Dolphin® Ring Cutter (REF RDD-A1-UC) should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level...
- Page 16 Specifications (continued) Immunity test IEC 60601 test level Compliance level Electromagnetic environment - guidance Radiated RF IEC 10 V/m, 80 MHz - 10 V/m IEC 60601-1-2 4th Edition: 61000-4-3 2700 MHz WARNING: Portable RF equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the Dolphin®...
- Page 17 Revision History Version Date Details Name RDD01-P078-V1 2022/08/22 Initial Release B.MacKeil RDD01-P078-V2 2022/08/23 Minor grammar and format updates B.MacKeil RDD01-P078-V4 2023/06/23 Updated with EMC test data, minor UI changes, P.Hennessey maximum ring cutting dimensions RDD01-P078-V4 ringrescue.com...
Need help?
Do you have a question about the Dolphin RDD-A1-UC and is the answer not in the manual?
Questions and answers