Advertisement
Chapter 3 Using GPS
Introduction
The FR6076 includes Global Positioning System (GPS) technology using the Qualcomm chip. GPS technology is
based on a worldwide system of GPS satellites orbiting the earth that continuously transmit digital radio signals.
These radio signals contain data on the satellites' locations and their exact clock time and are used to determine
your location on the earth.
!
WARNING
Software Installation
Third-party GPS navigation software is required. Evaluation software is available from various suppliers.
If interested in purchasing GPS navigation software check with the GPS software vendor (before purchasing,
downloading, or installing any software) to determine that the application is compatible with the FR6076. Refer to
the application's user guide for application installation and setup information.
FR6076 GPS Setup
The GPS-enabled FR6076 uses Microsoft Windows Mobile 6, so the operating system automatically
manages access to the GPS receiver to allow multiple programs to simultaneously access GPS data.
Ensure that the following settings are set on the FR6076:
Tap Start > Settings > System > External GPS icon.
1.
In the Programs tab, select GPD1 from the GPS program port drop-down list.
2.
In the Hardware tab, select COM6 in the GPS hardware port drop-down list.
3.
When using the FR6076 in a vehicle, it is the user's responsibility to place, secure and use in a
manner that will not cause accidents, personal injury or property damage or obstruct their view. It
is the responsibility of the driver to operate the vehicle in a safe manner, maintain observation of
all driving conditions at all times, and not become distracted by the device to the exclusion of safe
driving practices. It is unsafe to operate the controls of the device while driving.
51
Advertisement
