Connections
1
Connect the speaker cable with the white line to
the + connector on the front/center/surround
speaker and with the black band to the
- connector.
Black
band
Press the lever down,
then insert the cable
into the hole and
release the lever.
2
Connect the speaker cable with the white line to
the + connector of each terminal on the
subwoofer and with the black band to the
- connector.
White
line
Lever
SPEAKERS
FRONT CENTER SURROUND
Lift up the lever, then
insert the cable into
the hole and replace
the lever.
12
Lever
White
line
–
Black
band
3
Connect the subwoofer to the DVD receiver using
the system control cable from the subwoofer to
the TO NX-SW300 terminal at the rear of the
DVD receiver.
+
TO NX-SW300
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to a short-circuit.
– When connecting the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
– To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver, AC power
adaptor, TV or other sources of radiation.
SYSTEM
CONNECTOR