Advertisement
Action and Intonation, cont'd
However, because guitars are made of wood, they can change shape slightly
over time and according to environmental factors. This may result in the need
for modification to the action and intonation. Also, frets get worn out and, over
time, the fretboard itself may get worn down. This is one reason why guitars
need periodic maintenance. It is best to have this work done by an experienced
technician—especially truss rod adjustments and fret dressing.
But, again, this depends on your own needs. If you don't notice any
problems with the way your guitar works, then it's probably fine! If, on the
other hand, you are findng points where the strings are buzzing or the guitar is
out of tune higher up the neck, then it may be time to bring it to a technician
for adjustment. This is often called a setup.
Storing the Guitar
If you are using your guitar regularly, store your guitar where you have
easy access. The case is always a good idea. You can also put your guitar on
a floor stand, or hang it from the wall. These hangers and stands are quite
popular and are available at any music store.
If you are planning to leave the guitar for a long period of time, such as
many months or years, then it is wise to loosen the strings a little before storage.
This will ease the pressure on the neck and top.
Humidifiers
Remember that guitars are usually made of wood, which will react to
weather conditions. The cold, dry winters of Canada can be very hard on a
guitar. For this reason, players will often put a humidifier in the case, or put
a clip-on humidity controller in the soundhole of the guitar when it is in the
case. This can help prevent cracking and other problems.
Yamaha guitars sold in Canada are made with wood especially designed for
our climate. Most do not require humidity control, but it never hurts, especially
with higher priced models.
Advertisement
