Crestron IV-CAM Series Product Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. IP Camera
  5. IV-CAM Series
  6. Product manual
Crestron IV-CAM Series Product Manual

Crestron IV-CAM Series Product Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
View this document in HTML
crestron.com/docs/9440
Product Manual
IV-CAM Series
Crestron 1 Beyond Cameras
Crestron Electronics, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IV-CAM Series and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron IV-CAM Series

Summary of Contents for Crestron IV-CAM Series

  • Page 1 View this document in HTML crestron.com/docs/9440 Product Manual IV-CAM Series Crestron 1 Beyond Cameras Crestron Electronics, Inc.
  • Page 2 Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

  • Page 3: Table Of Contents

    Contents IV-CAM Series Crestron 1 Beyond Cameras Features Camera Features IV-CAM-P12 Features IV-CAM-P20 Features IV-CAM-I12 Features IV-CAM-I20 Features Camera Accessory Features IV-CAMA-UMB Features IVA-WMT-BRKT-1B Features IVA-CMT-BRKTJ-1B Features IV-CAMA-REMOTE Features PW-1225DU Features Specifications Camera Specifications IV-CAM-P12 Specifications IV-CAM-P20 Specifications IV-CAM-I12 Specifications...
  • Page 4 Advanced Camera Settings Tracking Menu Tracking Settings VISCA Commands Start/Stop Tracking Privacy ACK / Completion Messages Error Messages Commands Inquiry Commands Resources Crestron Support and Training Programmer and Developer Resources Product Certificates iv • Contents Product Manual — Doc. 9440A...

  • Page 5: Iv-Cam Series

    IV-CAM Series Crestron 1 Beyond Cameras The IV-CAM Series cameras are high quality PTZ cameras that output up to 1080p60 resolution video. Crestron 1 Beyond cameras are ideal for meetings in medium, large, and extra large spaces where one camera needs to capture several areas of the room. Intelligent features such as presenter tracking, group framing, and group tracking are available for IV-CAM-I12 and IV-CAM-I20 series cameras.

  • Page 6: Features

    Features Refer to the following sections for more information on the features provided by Crestron 1 Beyond cameras and accessories. This section provides the following information: •   Camera Features •   Camera Accessory Features 6 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 7: Camera Features

    Camera Features Refer to the following sections for more information on the features provided by Crestron 1 Beyond cameras. This section provides the following information: •   IV-CAM-P12 Features •   IV-CAM-P20 Features •   IV-CAM-I12 Features •   IV-CAM-I20 Features Product Manual — Doc. 9440A...

  • Page 8: Iv-Cam-P12 Features

    Compatible with Automate VX multi-camera systems Image flip allows for optional inverted mounting Single Ethernet connection provides power (PoE), viewing, control, and NDI®|HX video Easily configured with Crestron 1 Beyond Camera Manager software Available in Moon Gray and Bright White colors Automate VX Compatible The IV-CAM-P12 camera is compatible with Automate VX multi-camera speaker tracking systems.

  • Page 9: Iv-Cam-P20 Features

    Compatible with Automate VX multi-camera systems Image flip allows for optional inverted mounting Single Ethernet connection provides power (PoE), viewing, control, and NDI®|HX video Easily configured with Crestron 1 Beyond Camera Manager software Available in Moon Gray and Bright White colors Automate VX Compatible The IV-CAM-P20 camera is compatible with Automate VX multi-camera speaker tracking systems.

  • Page 10: Iv-Cam-I12 Features

    Supports 12x optical zoom for tracking distances up to 25 ft from participants Connects directly to a codec or recording/streaming device Single Ethernet connection provides power (PoE), viewing, and control Easily configured with Crestron 1 Beyond Camera Manager software Compatible with Automate VX multi-camera systems Group Framing Technology Group framingTracking utilizes visual AI to frametrack multiple participantspresenters smoothly in...
  • Page 11 Mounting Options (Sold Separately) Standard mounting holes make it easy to mount the camera. The IV-CAM-I12 is compatible with the IV-CAMA-UMB Universal Mounting Bracket, IVA-WMT-BRKT-1B Wall Mount Bracket, and IVA-CMT-BRKT-1B J-Mount Ceiling Bracket. Product Manual — Doc. 9440A IV-CAM Series • 11...

  • Page 12: Iv-Cam-I20 Features

    Connects directly to a codec or recording/streaming device Single Ethernet connection provides power (PoE), viewing, control, and NDI®|HX video Easily configured with Crestron 1 Beyond Camera Manager software Compatible with Automate VX multi-camera systems Available in Moon Gray and Bright White colors Presenter Tracking Capability Visual AI is used to smoothly track a single moving presenter as they move through a designated...
  • Page 13 Standard mounting holes make it easy to mount the camera. The IV-CAM-I20 ships with the color matched IVA-WMT-BRKT-1B Wall Mount Bracket, and is compatible with the IV-CAMA-UMB Universal Mounting Bracket and the IVA-CMT-BRKT-1B J-Mount Ceiling Bracket (both sold separately). Product Manual — Doc. 9440A IV-CAM Series • 13...

  • Page 14: Camera Accessory Features

    Camera Accessory Features Refer to the following sections for more information on the features provided by Crestron 1 Beyond accessories. This section provides the following information: •   IV-CAMA-UMB Features •   IVA-WMT-BRKT-1B Features •   IVA-CMT-BRKTJ-1B Features •   IV-CAMA-REMOTE Features •   PW-1225DU Features 14 •...

  • Page 15: Iv-Cama-Umb Features

    IV-CAMA-UMB Features IV-CAMA-UMB Universal Mount Bracket provides an all in one mounting solution for Crestron 1 Beyond cameras. The IV-CAMA-UMB can be mounted upright, inverted to the wall, or inverted to the ceiling. The IV-CAM-P20, IV-CAM-P12, IV-CAM-I20, and IV-CAM-I12-B cameras are compatible with the wall mount configuration, and the inverted ceiling mount configuration is only compatible with the IV-CAM-P20 and IV-CAM-P12 cameras.

  • Page 16: Iva-Wmt-Brkt-1B Features

    Wall Mount Bracket provides a secure wall mounting option for IV-CAM-P20, IV-CAM-P12, IV-CAM-I20, and IV-CAM-I12-B cameras. The IVA-WMT-BRKT-1B comes with an adjustable swivel head that positions the camera at a desired angle to capture the optimal view of participants. 16 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 17: Iva-Cmt-Brktj-1B Features

    J-Mount Ceiling Bracket provides an easy mounting solution for IV-CAM-P20, IV-CAM-P12, IV-CAM-I20, and IV-CAM-I12-B cameras. The IVA-CMT-BRKTJ-1B can be used in spaces where the camera has to be suspended from the ceiling to achieve optimal distance from the presentation area. Product Manual — Doc. 9440A IV-CAM Series • 17...

  • Page 18: Iv-Cama-Remote Features

    The IV-CAMA-REMOTE is an IR wireless remote designed to be used with IV-CAM-I12-B cameras. The IV-CAMA-REMOTE provides full access to camera video settings, calling predefined camera presets, and enabling or disabling camera tracking. 18 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 19: Pw-1225Du Features

    PW-1225DU Features PW-1225DU is a 12 VDC universal regulated power pack intended for use with Crestron 1 Beyond IV-CAM-P20, IV-CAM-P12, IV-CAM-I20, and IV-CAM-I12-B cameras. Product Manual — Doc. 9440A IV-CAM Series • 19...

  • Page 20: Specifications

    Specifications Refer to the following sections for more information on the specifications of the Crestron 1 Beyond cameras and accessories. This section provides the following information: •   Camera Specifications •   Camera Accessory Specifications 20 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 21: Camera Specifications

    Camera Specifications Refer to the following sections for more information on the specifications of the Crestron 1 Beyond cameras. This section provides the following information: •   IV-CAM-P12 Specifications •   IV-CAM-P20 Specifications •   IV-CAM-I12 Specifications •   IV-CAM-I20 Specifications Product Manual — Doc. 9440A...

  • Page 22: Iv-Cam-P12 Specifications

    Serial RS-232, RS-485 Control Protocol VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF Management Client Software Crestron 1 Beyond Camera Manager (Windows® OS computer required) Connectors (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232/485 port (1) 8-pin RJ-45 connector, female 3G-SDI OUT (1) BNC connector, female;...
  • Page 23 NOTE: To comply with the European Directive (CE), shielded CAT5e cable must be used as a minimum for PoE power. Power Pack (sold 12VDC, 2.5A, 50/60 Hz separately) Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (noncondensing) Product Manual — Doc. 9440A IV-CAM Series • 23...
  • Page 24 6.55 in. (166 mm) Width 8.89 in. (226 mm) Depth 5.86 in. (149 mm) Weight 4.12 lb (1.87 kg) Compliance Regulatory Model: M202306003 FCC Part 15 Class B, IC Class B, CE, Intertek® Listed for US and Canada 24 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 25 Dimension Drawings Product Manual — Doc. 9440A IV-CAM Series • 25...
  • Page 26 26 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 27: Iv-Cam-P20 Specifications

    Serial RS-232, RS-485 Control Protocol VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF Management Client Software Crestron 1 Beyond Camera Manager (Windows® OS computer required) Connectors (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232/485 port (1) 8-pin RJ-45 connector, female 3G-SDI OUT (1) BNC connector, female;...
  • Page 28 NOTE: To comply with the European Directive (CE), shielded CAT5e cable must be used as a minimum for PoE power. Power Pack (sold 12VDC, 2.5A, 50/60 Hz separately) Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (noncondensing) 28 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 29 6.51 in. (165 mm) Width 8.90 in. (226 mm) Depth 5.86 in. (149 mm) Weight 4.12 lb (1.87 kg) Compliance Regulatory Model: M202306003 FCC Part 15 Class B, IC Class B, CE, Intertek® Listed for US and Canada Product Manual — Doc. 9440A IV-CAM Series • 29...
  • Page 30 Dimension Drawings 30 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 31 Product Manual — Doc. 9440A IV-CAM Series • 31...

  • Page 32: Iv-Cam-I12 Specifications

    USB-B 3.0 Ethernet RJ-45, 100Mbps Serial RS-232, RS-485 Control Protocol VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF IR Receiver IR Camera Remote (IV-CAMA-REMOTE) Management Client Software Crestron 1 Beyond Camera Manager (Windows® OS computer required) Connectors 32 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 33 NOTE: To comply with the European Directive (CE), shielded CAT5e cable must be used as a minimum for PoE power. Power Pack (sold 12VDC, 2.5A, 50/60 Hz separately) Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (noncondensing) Product Manual — Doc. 9440A IV-CAM Series • 33...
  • Page 34 6.55 in. (166 mm) Width 8.89 in. (226 mm) Depth 5.86 in. (149 mm) Weight 4.11 lb (1.86 kg) Compliance Regulatory Model: M202306003 FCC Part 15 Class B, IC Class B, CE, Intertek® Listed for US and Canada 34 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 35 Dimension Drawings Product Manual — Doc. 9440A IV-CAM Series • 35...
  • Page 36 36 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 37: Iv-Cam-I20 Specifications

    USB: 1080p30/25, 720p30/25, 360p30 Communications USB-B 3.0 Ethernet RJ-45, 100Mbps Serial RS-232, RS-485 Control Protocol VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF Management Client Software Crestron 1 Beyond Camera Manager (Windows® OS computer required) Connectors Product Manual — Doc. 9440A IV-CAM Series • 37...
  • Page 38 NOTE: To comply with the European Directive (CE), shielded CAT5e cable must be used as a minimum for PoE power. Power Pack (sold 12VDC, 2.5A, 50/60 Hz separately) Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (noncondensing) 38 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 39 6.51 in. (165 mm) Width 8.90 in. (226 mm) Depth 5.86 in. (149 mm) Weight 4.11 lb (1.86 kg) Compliance Regulatory Model: M202306003 FCC Part 15 Class B, IC Class B, CE, Intertek® Listed for US and Canada Product Manual — Doc. 9440A IV-CAM Series • 39...
  • Page 40 Dimension Drawings 40 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 41 Product Manual — Doc. 9440A IV-CAM Series • 41...

  • Page 42: Camera Accessory Specifications

    Camera Accessory Specifications Refer to the following sections for more information on the specifications of the Crestron 1 Beyond camera accessories. This section provides the following information: •   IV-CAMA-UMB Specifications •   IVA-WMT-BRKT-1B Specifications •   IVA-CMT-BRKTJ-1B Specifications •   IV-CAMA-REMOTE Specifications •  ...

  • Page 43: Iv-Cama-Umb Specifications

    Product specifications for the IV-CAMA-UMB are provided below. Specifications Construction Base Material Die-cast aluminum Cover Material Plastic Dimensions Height 1.73 in. (44 mm) Width 8.90 in. (226 mm) Length 8.33 in. (212 mm) Weight 1.47 lb (0.67 kg) Dimension Drawings Product Manual — Doc. 9440A IV-CAM Series • 43...
  • Page 44 44 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 45 Product Manual — Doc. 9440A IV-CAM Series • 45...

  • Page 46: Iva-Wmt-Brkt-1B Specifications

    IVA-WMT-BRKT-1B Specifications Product specifications for the IVA-WMT-BRKT-1B are provided below. Specifications Construction Material Metal Dimensions Height 3.74 in. (95 mm) Width 2.56 in. (65 mm) Length 7.44 in. (189 mm) Weight 0.50 lb (0.23 kg) Dimension Drawings 46 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 47: Iva-Cmt-Brktj-1B Specifications

    Product specifications for the IVA-CMT-BRKTJ-1B are provided below. Specifications Construction Material Metal Dimensions Height (adjustable) Minimum 22.0 in. (519 mm); Maximum 44.0 in. (1118 mm) Width (bracket diameter) 5.12 in. (130 mm) Depth 9.12 in. (232 mm) Weight 1.74 lb (0.79 kg) Product Manual — Doc. 9440A IV-CAM Series • 47...
  • Page 48 Dimension Drawings 48 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 49 Product Manual — Doc. 9440A IV-CAM Series • 49...

  • Page 50: Iv-Cama-Remote Specifications

    Calls or sets camera presets Power Batteries (2) AAA batteries required (not included) Construction Material Plastic Weight 0.07 lb (0.03 kg) Compliance Regulatory Model: M202306003 FCC Part 15 Class B, IC Class B, CE 50 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 51: Pw-1225Du Specifications

    (1) 6 ft (1.83 m) attached cable with 5.5 x 3.3 mm DC power barrel connector Environmental Temperature 23° to 104°F (-5° to 40°C) Humidity 5% to 90% RH (noncondensing) Construction Plastic, black, desktop Weight 0.54 lb (0.24 kg) Compliance Product Manual — Doc. 9440A IV-CAM Series • 51...

  • Page 52: Installation

    Installation This section provides the following information: •   In The Box •   Mounting Requirements •   Install the Mounting Hardware •   Connect the Camera 52 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 53: In The Box

    In The Box The following items are included with Crestron 1 Beyond cameras. IV-CAM-P12-B Qty. Description IV-CAM-P12-B, Crestron 1 Beyond P12 Camera Additional Items Connector, 5-Pin (2062506) IV-CAMA-UMB-B, Universal Mount, Moon Gray (2062507) IV-CAM-P12-W Qty. Description IV-CAM-P12-W, Crestron 1 Beyond P12 Camera...

  • Page 54: Iv-Cam-P20-W

    IV-CAM-P20-W Qty. Description IV-CAM-P20-W, Crestron 1 Beyond P20 Camera Additional Items Connector, 5-Pin (2062506) IV-CAMA-UMB-W, Universal Mount, Bright White (2062508) IV-CAM-I12-B Qty. Description IV-CAM-I12-B, Crestron 1 Beyond I12 Camera Additional Items Connector, 5-Pin (2062506) IV-CAMA-REMOTE, IR Remote Cable, USB 3.0, B to A, 1.8 M (2062771) IV-CAM-I20-B Qty.

  • Page 55: Mounting Requirements

    Mounting Requirements Crestron 1 Beyond cameras muse be mounted per the following guidelines for optimal camera performance. Ensure cameras are mounted in location that offers a clear view of their subjects. NOTES: To avoid damaging the camera: Do not remove any screws from the camera. There are no user-serviceable parts inside. If the camera is damaged or malfunctioning, contact Crestron's True Blue Support Team via phone, email, or chat as described at https://www.crestron.com/Support.

  • Page 56: Mounting Measurements

    10.7 m) 3.1 m) IV-CAM-P20 Series 10–60 ft (3.1– 6–12 ft (1.8– 0° 18.3 m) 3.7 m) IV-CAM-I12-B 5–25 ft (1.5–7.6 m) 4–7 ft (1.8– 15° (Group Framing) 2.1 m) IV-CAM-I12-B 10–25 ft (3.1– 6–8 ft (1.8– 15° (Presenter Tracking) 7.6 m) 2.4 m) IV-CAM-I20 Series 15–50 ft (4.6– 6–10 ft (1.8– 15° 15.2 m) 3.1 m) 56 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 57: Install The Mounting Hardware

    Install the Mounting Hardware Crestron 1 Beyond cameras have multiple mounts available for installation depending on camera usage and room requirements. This section provides the following information: •   IV-CAMA-UMB Installation •   IVA-WMT-BRKT-1B Installation •   IVA-CMT-BRKTJ-1B Installation Product Manual — Doc. 9440A...

  • Page 58: Iv-Cama-Umb Installation

    Refer to the following sections for information on mounting the IV-CAMA-UMB. In the Box Qty. Description IV-CAMA-UMB, Crestron 1 Beyond Universal Mounting Bracket Additional Items Screw, 6.3 x 38 mm (2062877) Drywall Anchor (2062876) Screw, 1/4-20 x 3/8 in. (2062875) Hand Screw, M2.5 x 12 mm (2062878)
  • Page 59 7. Detach the large plastic cable cover from the top of the mount. 8. Insert the two included M2.5 x 12 mm hand screws through the standoff holes on each side of the mount. 9. Route the cables through the rear cover hole. Product Manual — Doc. 9440A IV-CAM Series • 59...
  • Page 60 11. Connect all required cabling into the camera. For more information about the required cabling, refer to Connect the Camera on page 12. Attach the included release plate to the bottom of the camera. Then, tighten the included 1/4-20 x 3/8 in. screw onto the release plate. 60 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 61 14. Tighten the two included M2.5 x 12 mm hand screws into the rear standoff holes on the camera. 15. Attach the small plastic cable cover into the bottom cable hole. 16. Attach the large top cover to the top of the mount. Product Manual — Doc. 9440A IV-CAM Series • 61...
  • Page 62 3. Using the Anchor Holes locations on the template as a reference, drill four pilot holes into the mounting surface. 4. If routing cables to the camera through the ceiling, make a suitable hole in the mounting surface. 62 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 63 6. Detach the small plastic cable cover on the rear of the mount. 7. Detach the large plastic cable cover from the top of the mount. 8. Route the cables through the bottom cover hole. Product Manual — Doc. 9440A IV-CAM Series • 63...
  • Page 64 10. Connect all required cabling into the camera. For more information about the required cabling, refer to Connect the Camera on page 11. Attach the included release plate to the bottom of the camera. Then, tighten the included 1/4-20 x 3/8 in. screw onto the release plate. 64 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 65 13. Tighten the two included M2.5 x 12 mm hand screws into the rear standoff holes on the camera. 14. Attach the small plastic cable cover into the rear cable hole. 15. Attach the large top cover to the top of the mount. Product Manual — Doc. 9440A IV-CAM Series • 65...

  • Page 66: Iva-Wmt-Brkt-1B Installation

    IVA-WMT-BRKT-1B Installation The IVA-WMT-BRKT-1B Wall Mount Bracket is used to mount Crestron 1 Beyond cameras to the wall when a camera tilt is required. The mounting plate attached to the camera can be tilted to center the camera shot. To mount the camera to a wall using the IVA-WMT-BRKT-1B Wall Mount Bracket: 1.
  • Page 67 7. Use the included screw to fix the camera on the camera mount plate. 8. Tilt the camera mount plate to achieve the desired camera tilt. NOTE: For information on tilt angles for cameras, refer to Mounting Measurements on page Product Manual — Doc. 9440A IV-CAM Series • 67...

  • Page 68: Iva-Cmt-Brktj-1B Installation

    IVA-CMT-BRKTJ-1B Installation The IVA-CMT-BRKTJ-1B J-Mount Ceiling Bracket is used to suspend Crestron 1 Beyond cameras from the ceiling. The IVA-CMT-BRKTJ-1B is typically used to mount cameras from the ceiling when the camera cannot be inverted. To mount the camera to a ceiling using the IVA-WMT-BRKT-1B J-Mount Ceiling Bracket: NOTE: Only install the IVA-CMT-BRKTJ-1B to a drywall or hard wall ceiling.
  • Page 69 3. Use the J-Mount as a template to position the pilot holes. Ensure that the J-Mount is level before proceeding. 4. Attach the mount onto the ceiling using four screws (not included). Choose the screw length and type in accordance with building specifications. Product Manual — Doc. 9440A IV-CAM Series • 69...
  • Page 70 5. Screw the J-mount into the ceiling mounted bracket. 6. Use the included screw to fix the camera on the camera mount plate. 70 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 71: Connect The Camera

    Refer to the following sections for more information on the required and optional camera connections. NOTES: To avoid damage and ensure optimal performance of the camera: Check the source power before powering on the camera. IV-CAM series cameras can be powered via a 15.4 W PoE switch or with the...

  • Page 72: Camera Ports

    The camera by default is set to DCHP. NOTE: Use shielded CAT5e (or greater) cables when running the cable over long distances and/or if NDI is used. 72 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 73: Poe Power

    PoE Power Crestron 1 Beyond camera support control, streaming, and power over a single Ethernet cable. If using a network switch, ensure that it is PoE certified and that it can supply 15.4 W for each connected camera. Alternatively, a PoE injector can be used to inject power between the switch and camera.
  • Page 74 To wire serial control, use the terminal block (included) with a serial cable. Then, connect the ends of the cable into the camera and the control device being used. 74 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 75: Configuration

    Configuration The Crestron 1 Beyond Camera Manager allows for the configuration and control of Crestron 1 Beyond Cameras. This section provides the following information: •   Initial Setup •   Device Configuration •   VISCA Commands Product Manual — Doc. 9440A IV-CAM Series • 75...

  • Page 76: Initial Setup

    Initial Setup Crestron 1 Beyond cameras require additional setup before configuring the camera. NOTE: Ensure all connections have been made to the camera before proceeding. For more information about camera connections, refer to Connect the Camera on page This section provides the following information: •  ...

  • Page 77: Install Camera Manager Software

    Install Camera Manager Software Use the following procedures to install the Crestron 1 Beyond Camera Manager software. System Requirements Ensure the host computer running the software meets the following system requirements. Windows® 10 OS or later Dual-core processor 4GB (or greater) memory 1GB (or greater) storage Ethernet or Wi-Fi™...

  • Page 78: Add Cameras

    Add Cameras Use the following procedures to add Crestron 1 Beyond cameras to the Crestron 1 Beyond Camera Manager software. NOTE: Before adding cameras to the Crestron 1 Beyond Camera Manager software, ensure that the software is first installed onto the computer. For more information on installing the Crestron 1...
  • Page 79 Access the Main Menu Open the Crestron 1 Beyond Camera Manager software either by selecting the desktop icon, or by navigating to the directory of the local computer where the software was installed. Desktop Icon The following screen is displayed when the software opens.
  • Page 80 The camera list is located on the left side of the user interface. Camera List 80 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 81 Add a New Camera To add a new camera to the camera list: 1. Select + Add Camera in the top left of the user interface. + Add Camera Product Manual — Doc. 9440A IV-CAM Series • 81...
  • Page 82 2. Select Search Network to search for cameras on the network. The desired camera must on the same network as the computer running the software. Cameras appear in the camera list with their IP address, MAC address, model, device name and firmware version. Search Network 82 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 83 TIP: Use the filter text field to narrow network search results for cameras. Input a parameter (IP address, camera model, MAC address) of the desired camera into the field. The search results will show all cameras that match the input parameters. Filter Text Field Product Manual — Doc. 9440A IV-CAM Series • 83...
  • Page 84 NOTE: A prompt is shown displaying "Unable to add camera. Please check network parameters". if the camera is unable to connect to the host computer.  Verify that the camera's network parameters are correct under the ADD CAMERA banner. 84 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 85 Network Parameters 4. Enter a password for the camera into the New Password and Confirm Password fields, then select Apply. Password Entry 5. Select Add Camera. Product Manual — Doc. 9440A IV-CAM Series • 85...
  • Page 86 The camera is now available in the camera list. Camera List 86 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 87 Add a Configured Camera To add a camera that was previously configured in Crestron 1 Beyond Camera Manager but is not currently displayed in the camera list: 1. Select + Add Camera in the top left of the user interface.
  • Page 88 The ADD CAMERA window is displayed. Add Camera Window 88 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 89 TIP: Use the filter text field to narrow network search results for cameras. Input a parameter (IP address, camera model, MAC address) of the desired camera into the field. The search results show all cameras that match the input parameters. Filter Text Field Product Manual — Doc. 9440A IV-CAM Series • 89...
  • Page 90 3. Cameras appear in the camera list with their IP address, MAC address, model, device name and firmware version. Select the desired camera in the camera list, then input the password of the camera into the Password text field. Password Text Field 90 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 91 4. Select Add Camera in the bottom right of the ADD CAMERA window. Add Camera Window NOTE: The software shows a prompt indicating that the camera could not connect if the password for the camera is incorrect. Product Manual — Doc. 9440A IV-CAM Series • 91...
  • Page 92 Manually Add a Camera A camera can be added manually to the camera list by entering its network parameters within the ADD CAMERA menu. To add a camera to the camera list manually: 92 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 93 ADD CAMERA banner. Network Parameters 2. Select Add Camera in the bottom right of the ADD CAMERA window. Add Camera The camera is now added to the camera list. Product Manual — Doc. 9440A IV-CAM Series • 93...
  • Page 94 1. Select Delete on the desired camera in the camera list. Delete Camera A window prompt is displayed stating "The following action will delete the camera. Are you sure you want to proceed?". 94 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 95 Window Prompt 2. Select Ok. The camera is now deleted from the software. To add the camera back to the software, refer to Add a Configured Camera on page Product Manual — Doc. 9440A IV-CAM Series • 95...

  • Page 96: Set A Static Ip Address

    Set a Static IP Address Crestron 1 Beyond cameras ship with DHCP turned on by default. The camera should be set to a static IP address for communications over the network. To set a static IP address for a camera: 1. Select Settings on the desired camera in the camera list to open the Advanced Settings menu.
  • Page 97 The Advanced Settings menu is displayed. Advanced Settings Menu Product Manual — Doc. 9440A IV-CAM Series • 97...
  • Page 98 4. Use the IP Address text field to enter a static IP address for the camera. 5. Select Save Settings to save the static IP address for the camera. The camera is now set to a static IP address. 98 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 99: Update Firmware

    Update Firmware Once the Crestron 1 Beyond camera is added to the Crestron 1 Beyond Camera Manager software, the camera should be updated to the latest firmware. For more information on adding a camera to the software, refer to Add Cameras on page To update the firmware of the camera: 1.
  • Page 100 The Advanced Settings menu is displayed. Advanced Settings Menu 100 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 101 6. The firmware update status is displayed next to Upgrade Status. Wait for the Upgrade Status to display Completed before leaving this menu. Once Completed is shown, the firmware update is complete. The camera is now updated to the latest firmware. Product Manual — Doc. 9440A IV-CAM Series • 101...

  • Page 102: Change The Camera Mode (Iv-Cam-I12/20 Only)

    IV-CAM-I12 and IV-CAM-I20 cameras can be set either Group Framing/Tracking or Presenter Tracking modes, and the desired camera mode should be set once the camera is added to the Crestron 1 Beyond Camera Manager software. For more information on adding a camera to the software, refer to...
  • Page 103 The OSD menu is then displayed overlaid on the camera’s video feed. TIP: Alternatively, the OSD menu can be accessed with the IV-CAMA-REMOTE Crestron 1 Beyond IR Camera Remote. To access the OSD menu with the IR camera remote, press Menu on the remote. 2. Use the navigation pad on the left side of the user interface to move down through the OSD menu to the System option.

  • Page 104: Multi-Camera Switching Configuration (Beta)

    Additional Presenter Tracking and Group Framing settings require configuration for Multi-Camera Switching to operate properly. For more information on Presenter Tracking and Group Framing settings, refer to Tracking Settings on page 160. 104 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 105 1. Select Tracking on the IV-CAM-I12 set to Group Framing mode in the camera list to access the Tracking menu. Tracking Button Product Manual — Doc. 9440A IV-CAM Series • 105...
  • Page 106 The Tracking Menu is displayed. Tracking Menu 106 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 107 2. Select the Tracking Settings tab to access the Tracking Settings. Select Tracking Settings The Tracking Settings menu is displayed. The Multi-Cam Tracking settings are located at the bottom of the Tracking Settings menu. Product Manual — Doc. 9440A IV-CAM Series • 107...
  • Page 108 Tracking Settings 108 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 109 Presenter Tracking mode. For more information on setting an IP address for a camera, refer to Set a Static IP Address on page 5. Select the Save Settings button to save the configuration. Both IV-CAM-I12 cameras are now set to multi-camera switching mode. Product Manual — Doc. 9440A IV-CAM Series • 109...

  • Page 110: Device Configuration

    Initial Setup on page This section provides the following information: •   Accessing Camera Feeds •   Camera Controls •   On-Screen Display (OSD) •   Advanced Camera Settings •   Tracking Menu •   Tracking Settings 110 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 111: Accessing Camera Feeds

    View the Main PTZ Camera Feed To view the main PTZ camera's video feed, select Main on the desired camera in the camera list. Main Video Feed Product Manual — Doc. 9440A IV-CAM Series • 111...
  • Page 112 NOTE: If four camera feeds are displayed in the quad view, adding a new feed from the camera menu will replace the last added feed. To control the camera feed that is replaced, left click on the feed in the quad view before selecting a new feed 112 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 113 To view the wide-angle reference camera's video feed, select Reference on the desired camera in the camera list. Reference Video Feed The wide-angle reference camera's feed is now displayed in the user interface. Wide-Angle Reference Stream Product Manual — Doc. 9440A IV-CAM Series • 113...
  • Page 114 To close a camera's video feed, right click the desired video feed and select Close Stream. Close Stream NOTE: The procedure above works on both the quad view and full screen video feeds. 114 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 115 Full Screen Close Stream Alternatively, selecting the Main or Reference buttons closes the respective camera's video feed. Product Manual — Doc. 9440A IV-CAM Series • 115...
  • Page 116 NOTE: Selecting the double arrow icon while the video feed is in full screen will enter full screen borderless mode, hiding the user interface. Right click and select Close Stream to exit the full screen borderless mode. Double Arrow Icon 116 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 117: Camera Controls

    Camera Controls Crestron 1 Beyond camera shots can be manually configured with the Crestron 1 Beyond Camera Manager software. These controls are located at the bottom of the user interface. Camera Settings Product Manual — Doc. 9440A IV-CAM Series • 117...
  • Page 118 NOTE: Auto focus is only available when presenter tracking is disabled. When presenter tracking is enabled, the camera automatically focuses the camera lens. For more information about Presenter Tracking, refer to Presenter Tracking Settings on page 163. 118 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 119 Call: Switch the camera shot to the preset. If the preset has not been set first, Call does not switch the camera shot. Clear: Delete the camera shot set to the preset. The preset is now empty and can be Set for another camera shot if desired. Product Manual — Doc. 9440A IV-CAM Series • 119...
  • Page 120 Disable Group Tracking IV-CAM-I20 only OSD Menu Toggle All cameras Reboot All cameras Preset Zone 1 IV-CAM-I20 only Preset Zone 2 IV-CAM-I20 only Preset Zone 3 IV-CAM-I20 only Preset Zone 4 IV-CAM-I20 only 120 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 121 In-Frame button: This enables or disables debug mode. Debug mode shows a box around faces in the camera shot. The circle next to the button indicates the status of Debug mode. Grey circle: Debug mode is off. White circle: Debug mode is on. In-Frame Button Product Manual — Doc. 9440A IV-CAM Series • 121...

  • Page 122: On-Screen Display (Osd)

    On-Screen Display (OSD) Crestron 1 Beyond cameras have an integrated On-Screen Display (OSD) menu where camera settings can be changed. To access the OSD menu, select Menu on the desired camera in the camera list. 122 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 123 The OSD menu is then displayed overlaid on the camera’s video feed. Alternatively, the OSD menu can be accessed with the IV-CAMA-REMOTE Crestron 1 Beyond IR Camera Remote. To access the OSD menu with the IR camera remote, press Menu on the remote. Product Manual — Doc. 9440A...
  • Page 124 3D Noise Reduction level. 0 - 5 Dynamic Range Compression level. Mirror Off/On Mirrors camera output. Invert Off/On Inverts the PTZ camera video feed. Video Format 1080p30/29.97/25/60/59.94/50, Adjust camera video output 720p60/59.94/50/ format. 124 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 125 1/50 - 1/10000 Adjust the shutter speed of the camera. Iris F1.6 - F14, Close Adjust the aperture of the camera. VF Brightness 0 - 14 Adjust the reference camera's video brightness. Product Manual — Doc. 9440A IV-CAM Series • 125...
  • Page 126 Turn Preset Freeze On or Off. Privacy Mode Off/On Turn Privacy Mode On or Off. Digital Zoom Off/On Turn Digital Zoom On or Off. Limit x1 - x16 Adjust the Digital Zoom limit. 126 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 127 Off on the video feed. FW Version Displays the camera firmware version. Reset OSD Confirm Select Confirm to reset OSD menu settings to the factory default. NOTE: Reset OSD does not affect the System OSD menu settings. Product Manual — Doc. 9440A IV-CAM Series • 127...
  • Page 128 Displays the camera's subnet mask address. Gateway Displays the camera's static gateway address. DNS 1 Displays the camera's static primary DNS lookup address. DNS 2 Displays the camera's static secondary DNS lookup address. 128 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 129: Advanced Camera Settings

    Advanced Camera Settings This section contains information on the Crestron 1 Beyond camera advanced settings. These are used to change the protocol, network, user, and firmware update settings. To access the Advanced Settings menu, select Settings on the desired camera in the camera list.
  • Page 130 The Protocol settings are displayed by default when the Advanced Settings menu is opened. Protocol settings include streaming options for camera output and control settings for interacting with control devices (such as a Crestron touch screen). Select the Save Settings button in the bottom right of the Advanced Settings window to save any changes made.
  • Page 131 Protocol Tab Product Manual — Doc. 9440A IV-CAM Series • 131...
  • Page 132 Max Bitrate: Set the maximum bit rate of the video stream. The maximum supported value varies by camera model. Frame Rate: Select the stream's frame rate. 132 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 133 Encode Profile: Select whether the video stream will use a low, base, or high-profile encoding type. Control Settings The Control settings are used to set a secondary connection to the camera from a control device (such as a Crestron touch screen). Control Settings The following Control settings are available.
  • Page 134 Control Port: Enter the port number into the Control Port text field for the secondary connection. The default value of 5500 should be retained for most setups. NDI: Select Enable or Disable to turn the NDI video output for the camera on or off. 134 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 135 IP addresses for the camera. For more information on setting a static IP address, refer to Set a Static IP Address on page Reboot All Cameras: Select to restart all cameras available in the camera list. Product Manual — Doc. 9440A IV-CAM Series • 135...
  • Page 136 Select the Save Settings button in the bottom right of the Advanced Settings window to save any changes made. To access the Network settings, select the Network tab on the top of the Advanced Settings menu. Network Menu 136 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 137 DNS 2: Enter a static secondary DNS (Domain Name Server) lookup address. RTSP Port: Enter a port that will be used for the camera's RTSP video-over-IP streams. App Port: Enter a port that will be used for communication between the Crestron 1 Beyond Camera Manager software and the camera.
  • Page 138 To access the Upgrade menu, select Upgrade on the top right of the Advanced Settings menu. Upgrade Menu For information on performing a firmware update for the camera, refer to Update Firmware on page 138 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 139 2. Enter the desired new password in the New Password text field. 3. Enter the same new password in the Confirm Password text field. 4. Select Save Settings to change the password of the camera. The camera's password has been updated. Product Manual — Doc. 9440A IV-CAM Series • 139...

  • Page 140: Tracking Menu

    To access the Tracking menu, select the Tracking button in the camera list. Tracking Button The Tracking Menu is displayed. NOTE: The IV-CAM-I20 Tracking Menu is shown below as an example. 140 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 141 Refer to the following sections to configure the intelligent features of the IV-CAM-I20 or IV-CAM-I12 cameras. This section provides the following information: •   Set the Tracking Zone •   Set the Tracking Shots •   PTZ Alignment •   Blocking Zones •   Preset Zones Product Manual — Doc. 9440A IV-CAM Series • 141...
  • Page 142 NOTE: The camera does not save settings automatically. Make sure to save frequently during the setup process. To draw a Tracking Zone: 1. Select Set Tracking Zone in the top left of the Tracking Zones menu. When selected, the cursor moves into the video frame. 142 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 143 NOTE: The red box in the image below is the Blocking Zone for this configuration. For more information about drawing a Blocking Zone, refer to Blocking Zones on page 152. 4. Once the Tracking Zone is set, select Save Settings. Product Manual — Doc. 9440A IV-CAM Series • 143...
  • Page 144 NOTE: When no presenter is detected or tracked, the camera will revert to the Home Shot (Preset 0). For more information on the Home Shot (Preset 0), refer to Camera Controls on page 117. 144 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 145 The Set Tracking Shots menu contains Tracking Shot (Preset 1) and Home Shot (Preset 0) settings. To access the Set Tracking Shots menu, select Set Tracking Shots in the top left of the Tracking Zones menu. Set Tracking Shots Product Manual — Doc. 9440A IV-CAM Series • 145...
  • Page 146 Mode (IV-CAM-I12/20 Only) on page 102 The Tracking Shot (Preset 1) determines how tightly the camera frames a presenter while tracking and the maximum amount of zoom and upwards tilt-motion of the tracking shot. 146 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 147 Depending on the height of the subject, add enough headroom to allow for taller presenters. The headroom defined in the Tracking Shot limits how far up the camera will tilt while tracking. 2. Once the Tracking Shot is configured, select Save Tracking Shot. Product Manual — Doc. 9440A IV-CAM Series • 147...
  • Page 148 To set the Home Shot (Preset 0): 1. Select Set Tracking Shots in the top left of the Tracking Zones menu. When selected, the Set Tracking Shots menu is displayed. Set Tracking Shots 148 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 149 2. Use the navigation pad and the zoom buttons to adjust the camera shot. The camera shot should have a full view of the presentation area. 3. Once the Home Shot is configured, select Save Home Shot. The Home Shot (Preset 0) is now set. Product Manual — Doc. 9440A IV-CAM Series • 149...
  • Page 150 2. Select PTZ Alignment in the top left of the Tracking Zones menu. Select PTZ Alignment A window is displayed showing the PTZ's video feed and wide-angle camera's video feed overlaid with a blue crosshair. 150 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 151 4. Once the blue crosshairs in the PTZ video feed and the wide-angle feed are aligned, select Save Settings to confirm the changes. 5. Select the back arrow on the left side of the software to exit the PTZ Alignment interface. Product Manual — Doc. 9440A IV-CAM Series • 151...
  • Page 152 Blocking Zones are indicated in the video frame as red boxes. To draw a Blocking Zone: 1. Select one of the options underneath the Blocking Zones header. When an option is selected, the cursor moves into the video frame. 152 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 153 There is no padding around the edges of Blocking Zones, they behave precisely as they are drawn. Product Manual — Doc. 9440A IV-CAM Series • 153...
  • Page 154 This prevents people entering or leaving the room from triggering the camera's facial detection. For more information about drawing a Tracking Zone, refer to Set the Tracking Zone on page 142. Participant Blocking Zone 154 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 155 Preset Zone, refer to Preset Zones on page 156. Display Blocking Zone 4. Once the Blocking Zones are set, select Save Settings. The Blocking Zones are now configured to ignore the defined areas. Product Manual — Doc. 9440A IV-CAM Series • 155...
  • Page 156 Preset Zones 2. Press and hold the cursor over the location in the video frame where the Preset Zone should begin. Then, drag the cursor to draw the Preset Zone. 156 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 157 For more information about drawing a Tracking Zone, refer to Set the Tracking Zone on page 142. For more information about drawing a Blocking Zone, refer to Blocking Zones on page 152. Preset Zone Example Product Manual — Doc. 9440A IV-CAM Series • 157...
  • Page 158 4. Select Set Presets. The Set Preset Zones menu appears. Set Presets Preset Zones Menu 158 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 159 7. Once the Preset Zone camera shots are set, select the back arrow button in the top right of the Set Preset Zones menu to return to the Tracking Zones menu. 8. Select Save Settings to save the Preset Zones. Product Manual — Doc. 9440A IV-CAM Series • 159...

  • Page 160: Tracking Settings

    The Tracking Settings menu is used to define specific camera settings that affect how intelligent functions (Group Framing, Group Tracking, and Presenter Tracking) operate. To access the Tracking Settings, select the Tracking Settings tab within the Tracking menu. Select Tracking 160 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 161 For more information on changing the camera mode, refer to Change the Camera Mode (IV-CAM-I12/20 Only) on page 102. The following image shows the IV-CAM-I20 Tracking Settings as an example. Product Manual — Doc. 9440A IV-CAM Series • 161...
  • Page 162 Tracking Settings This section provides the following information: •   Presenter Tracking Settings •   Group Framing Settings 162 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 163 Mode (IV-CAM-I12/20 Only) on page 102 Refer to the following sections for information on the available Presenter Tracking settings. Presenter Tracking Settings Auto-Tilt When enabled, the camera will tilt up or down once locked onto a presenter. Product Manual — Doc. 9440A IV-CAM Series • 163...
  • Page 164 Shot (Preset 0) and Tracking Shot (Preset 1), refer to Set the Tracking Shots on page 145. Power On State Determines whether Presenter Tracking is enabled or disabled when the camera is powered on. 164 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 165 Group Framing Settings Track Sensitivity Use the slider to determine how sensitive the wide-angle camera is to motion detection. Lower this setting if the camera gets distracted by lighting changes or shadows. Product Manual — Doc. 9440A IV-CAM Series • 165...
  • Page 166 Multi-Camera Switching settings are located in the Group Framing settings. For more information about configuring two IV-CAM-I12 cameras for Multi-Camera Switching, refer to Multi-Camera Switching Configuration (Beta) on page 104. Multi-Camera Switching Settings 166 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 167: Visca Commands

    VISCA Commands Crestron 1 Beyond cameras can be controlled using the VISCA protocol through either a serial (RS-232 / RS-485) or IP connection. By default, the port for IP control is set to 5500. For serial communication, make sure the baud rate of the controller is set to 9600 bps. Below is a comprehensive list of VISCA commands that can be used to control the cameras.

  • Page 168: Commands

    8x 01 04 18 01 FF One Push AF Trigger CAM_ Direct 8x 01 04 47 0p 0q 0r 0s 0t 0u p,q,r,s: Zoom Position t,u,v,w: ZoomFocus 0v 0w FF Focus Position 168 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 169 8x 01 04 0C 00 FF Gain Setting 8x 01 04 0C 02 FF Down 8x 01 04 0C 03 FF Direct 8x 01 04 4C 00 00 0p 0q FF p,q: Gain Position Product Manual — Doc. 9440A IV-CAM Series • 169...
  • Page 170 8x 01 06 08 02 FF IR receiver On/Off 8x 01 06 08 03 FF Information 8x 01 7E 01 18 02 FF Operation status display On/Off Display 8x 01 7E 01 18 03 FF 170 • IV-CAM Series Product Manual — Doc. 9440A...

  • Page 171: Inquiry Commands

    8x 09 04 38 FF y0 50 02 FF Auto Focus y0 50 03 FF Manual Focus CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s p,q,r,s: Focus Position Product Manual — Doc. 9440A IV-CAM Series • 171...
  • Page 172 8x 09 04 63 FF y0 50 00 FF y0 50 02 FF Neg.Art y0 50 04 FF B&W CAM_MemoryInq 8x 09 04 3F FF y0 50 0p FF p: Memory number last operated. 172 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 173 50 0w 0w 0w 0w wwww = Pan Position zzzz = Tilt Position 0z 0z 0z 0z FF Pan‐tiltModeInq 8x 09 06 10 FF y0 50 pq rs FF p,q,r,s: Pan/Tilt Status Product Manual — Doc. 9440A IV-CAM Series • 173...
  • Page 174 (CAM_Zoom Direct – p,q,r,s Zoom Position) Optical Zoom Ratio Optical Zoom Ratio 0000 1851 22BE 28F6 2D45 3086 3320 3549 371E 38B3 3A12 3B42 3C47 3D25 3DDF 3E7B 3EFB 3F64 3FBA 4000 174 • IV-CAM Series Product Manual — Doc. 9440A...
  • Page 175 Exposure Comp (CAM_ExpComp) (CAM_ExpComp Direct – p,q ExpComp Position) 0000 1851 22BE 28F6 2D45 3086 3320 3549 371E 38B3 3A12 3B42 3C47 3D25 4000 Product Manual — Doc. 9440A IV-CAM Series • 175...

  • Page 176: Resources

    Resources The following resources are provided for the IV-CAM Series. NOTE: You may need to provide your Crestron.com web account credentials when prompted to access some of the following resources. Crestron Support and Training Crestron True Blue Support Crestron Resource Library Crestron Online Help (OLH) Crestron Training Institute (CTI) Portal...
  • Page 177 Crestron Electronics, Inc. Product Manual — Doc. 9440A 15 Volvo Drive, Rockleigh, NJ 07647 03/12/24 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...

This manual is also suitable for:

Iv-cam-p12Iv-cam-p20Iv-cam-i12Iv-cam-i20Iv-cam-p12-bIv-cam-p12-w ... Show all

Table of Contents